Bionaire BAP1550 Kullanım Kılavuzu - Sayfa 2

Hava Temizleyici Bionaire BAP1550 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bionaire BAP1550 2 sayfaları. Tower air purifier with permanent filters
Ayrıca Bionaire BAP1550 için: Kullanım Kılavuzu (2 sayfalar)

Sayfayı Yazdır

BAP1550-IUK_07EM1.qxd

4/25/07

20:46

Page 5

Fig. 2

Fig. 3

mechanical functions of this unit. If the unit

U.K. and IRELAND

becomes damaged return to the place of

Fig. 1

purchase or phone the helpline number on

the back of this leaflet.

PLEASE READ AND SAVE THESE

• If the supply cord or plug is damaged, it must

IMPORTANT INSTRUCTIONS.

be replaced by the manufacturer or its service

With proper care and use, this Bionaire

agent or a similarly qualified person in order

air purifier will give you fresh, clean air

to avoid hazard.

for many years.

• The air purifier contains no user serviceable

NOTE: Before reading these instructions, please

parts and should the product suffer damage

view the corresponding illustrations.

or breakdown it must be returned to the

manufacturer or its service agent.

DESCRIPTIONS (SEE FIG. 1 & FIG. 1-A)

• Should the air purifier stop working, first check the

A. Power Light

fuse in the plug (UK only) or fuse/circuit breaker at

B. Speed Control

the distribution board is operating, before

contacting the manufacturer or service agent.

C.Ioniser Control

• The ioniser may cause a static charge to build

D.Filter Indicator Light

up on the air output grill. A static charge may

E. Ioniser Light

be felt if the unit is not properly grounded. To

F. Washable Foam Pre-filter

avoid a static charge, plug the unit into a

G.Inlet Grill

grounded outlet, or properly install a ground

adaptor. The static shock will not occur if the

H.Permanent HEPA filters (2 pcs)

ioniser is off.

I. Filtered Air Outlet

• This appliance is not intended for use by

J. Power Button

persons (including children) with reduced

K. Infrared

physical, sensory or mental capabilities, or lack

L. Operation Indicator Light

of experience and knowledge, unless they have

been given supervision or instruction concerning

SAFETY PRECAUTION

use of the appliance by a person responsible for

Carefully read and retain all instructions before

their safety. Children should be supervised to

using the air purifier.

ensure that they do not play with the appliance.

• To avoid fire or shock hazard, check that the

HOW THE AIR PURIFIER WORKS

voltage on the product corresponds to your

electricity supply and plug directly into an

Dirty, dust laden air is drawn through the back of

electrical outlet.

the air purifier and through the multi-stage

filtration system.

• Keep cord out of heavy traffic areas and to

avoid fire hazard, never put the cord under

The permanent HEPA filter entraps 99% of all

rugs, or near any heat source.

smaller visible and non-visible particles down to

• Carefully discard any plastic wrapping that

2 microns in size.

was used for the packaging. If the filter is

covered by a bag when shipped, remove

IONISER

plastic bag before use.

Your Bionaire

controlled ioniser, which when turned on,

• Do not use the air purifier outside.

releases negative ions into the outgoing filtered

• Do not place the unit near any heat source or

air. Ions are tiny particles that carry either a

in direct sunlight.

positive or negative charge. These ions exist

• Always unplug the air purifier before moving it,

naturally all around us in the air, water and

Fig. 4

opening the grill, changing the filters, cleaning the

ground. Both positive and negative ions are

air purifier or whenever it is not in use.

colourless, odourless and completely harmless.

• Do not use in or around water or any other

Negative ions help the air purification process

liquids. Do not attempt to wash the unit under

by attaching themselves to very small airborne

running water.

particles in the room. These particles take on a

• Use appliance only for intended household

negative charge and may join with positively

use as described in this manual.

charged particles, such as dust, pollen, smoke

• Ensure that all air openings are not restricted

and pet dander to form larger particles that are

or covered in any way.

then more readily captured by the filter system,

or they may be attracted to positively charged

• Do not place anything on top of the unit.

surfaces like walls or floors.

• Never insert any object into any openings.

You may also note, after extended use, that dust

• Do not use the air purifier if any part is

may have collected around the grills or front panel.

missing or damaged in any way.

This is from the ionisation effect caused by the

• Do not attempt to repair or adjust any

negative ions exiting from the air outlet.This dust

does not come from the air output, but is drawn out

of the uncleaned air going past the air outlet.

This is additional evidence of the air cleaning

effectiveness of negative ions. The dust can be easily

removed with a clean, dampened cloth or soft brush.

NOTE: it is important to clean the permanent

HEPA filters at recommended intervals. Using the

ioniser in conjunction with dirty filters may result in

dirty particles exiting the air purifier and being

attracted to walls, carpets, furniture and other

household objects. These dirty particles may prove

very difficult to remove.

PRE-OPERATING INSTRUCTIONS

1. After removing the unit from the box, remove

the plastic covering from the unit.

2. Select a firm level place where there are no

obstructions to the air inlet (rear grill) or

filtered air outlet.

3. Remove the inlet grill by pulling the grill

towards you.

4. Remove both permanent HEPA filters by

gripping on both sides and pulling forward.

5. The filter clip can only be attached to the

hang tabs on the filter one way (see Fig. 2).

The filter clip should easily slide onto the filter

hang tabs. Do not use force whilst attaching

the filter clip to the filter. Align the clip on the

permanent HEPA filter with the rails on the

inside of the unit.(see Fig. 3)

NOTE: The pleated material and rubber gasket

should be facing towards the unit when applied.

6. Replace the inlet grill by sliding back on to the

unit. Make sure that it snaps securely into

position (the grill only goes on one way).

NOTE: Do not point outlet towards wall.

OPERATING INSTRUCTIONS

Your remote control requires (2) AAA batteries

(not included) for operation. To install the

Air Purifier has an independently

batteries, simply depress and slide the back of

the remote control with your thumb on the arrow

indentation. Insert batteries according to the

diagram shown inside and replace cover. Remove

batteries before discarding the remote control.

• DO NOT mix old and new batteries.

• DO NOT mix alkaline, standard (carbon-zinc)

or rechargeable (nickel-cadmium) batteries.

1. Plug into a suitable electrical outlet.

2. Press the power button (

) on the control

panel or the remote control. The unit will turn

on high only the first time the unit is turned

on. All other times it is turned on, the unit

remembers the last speed selected and will

turn on at that speed, and the power light will

illuminate letting you know the power is on.

3. You can then select the desired speed

setting. This air cleaner has three speed

settings. You can select from HIGH (

MEDIUM(

), or LOW (

) by pushing the

5. This model utilises a hang tab and filter clips to

insure that the filter is properly in place. Before

desired operating speed button on the control

replacing the permanent HEPA filter make sure

panel or the remote control.

that the hang tab is securely in place.

4. To release negative ions into the filtered air,

6. Align the clips on the side of your permanent

press the ioniser button (

) to either on the

HEPA filter with the rails on the inside of the

control panel or the remote control and the

light will illuminate.

unit. Gently slide the filter onto the rails.

5. The ioniser will not work unless the unit is running.

7. The filter clip should easily slide onto the filter

hang tabs. Do not use force while attaching the

6. For optimum air filtration, it is recommended to

filter clip to the filter. Align the clip on the side

operate the air purifier continuously. Its rugged

of your permanent HEPA filter with the rails on

motor is designed to give many years of service.

the inside of the unit. (see Fig. 2 and 3)

7. For continuous use it is recommended to operate

NOTE: The pleated material and rubber gasket

the air purifier at the Medium (

) setting. For

should be facing towards the unit when applied.

quieter operation or use in a bedroom, select the

Low ( ) setting. When high levels of air pollution

8. Replace the inlet grill by sliding back on to the

unit. Make sure that it snaps securely into

are present, select the HI (

) setting to quickly

position (the grill only goes on one way).

circulate clean filtered air.

NOTE: Do not point outlet towards wall.

CLEANING AND MAINTENANCE

9. The filter life indicator (

1. Turn the air purifier off and unplug it before

once the permanent filters have been cleaned.

cleaning.

Reset indicator by pressing the power button

2. The outside of the air purifier can be cleaned

(

) on the control panel for 2 seconds.

with a soft, clean dampened cloth.

Filter Life – The filter has been designed to never

3. The rear air inlet grill can be removed and

need replacement, however, it does need servicing.

washed in warm soapy water (not dishwasher

We recommend that under normal conditions of

safe). Dry before replacing in the unit.

continuous use, the filters should be cleaned at least

every 3 months to help maintain optimal performance.

4. The filtered air outlet can be cleaned of dust

with a small, soft brush.

Should the filter become damaged during

cleaning replacements are available by calling

5. If you wish to clean the inside of the air purifier,

0870 759 9000.

please only use a dry, soft cloth to wipe it down.

PERMANENT HEPA filter Filters

PERMANENT HEPA FILTER CLEANING

(Usage: 2 pcs)

Filter Indicator Light (

) - Your air purifier has

an indicator light that illuminates when it is time

TROUBLESHOOTING

to clean the permanent HEPA filters.

Problem

1. Every few weeks check the condition of the

Unit will not

pre-filter.

operate.

2. Remove the inlet grill. If the foam pre-filter has

collected a noticeable amount of dust, remove it

from the inlet of the grill and wash it in warm soapy

water. Rinse and dry the pre-filter thoroughly

before replacing it in the inlet of the grill.

3. With the inlet grill removed, check the

Decreased

air flow.

condition of your permanent HEPA filters. If

the filters are dirty, remove them by gripping

on both sides and pulling forward.

4. To clean the permanent HEPA filters use a

crevice tool or brush attachment with your

vacuum cleaner. Run the attachment along the

inlet and outlet side of the filter trying to clean

Noise

between the pleated filter layers. (see Fig. 4).

NOTE: Vacuuming will restore performance

of the permanent HEPA filter however, the

Holmes Products (Europe) Ltd reserves the right

filter may appear stained. This is normal and

to change or modify any specifications without

does not affect performance in any way.

notice.

DO NOT USE WATER OR ANY OTHER

For U.K. and Ireland only:

HOUSEHOLD CLEANERS OR

If the plug is not suitable for the socket outlets in

DETERGENTS TO CLEAN THE

your home, it can be removed and replaced by

PERMANENT HEPA FILTERs.

a plug of the correct type. Please refer to

"Installation of a plug" below.

Installation of a plug Applicable to

U.K. and Ireland.

WARNING - THIS APPLIANCE MUST BE

EARTHED

The wires in the mains lead are coloured as such:

GREEN AND YELLOW

- EARTH

BROWN

- LIVE

BLUE

- NEUTRAL

Please note that the colour of these mains wires

may not correspond with the colour markings

that identify the terminals in your plug.

Please proceed as follows:

The wire which is coloured GREEN AND YELLOW

must be connected to the terminal which is marked

with the letter 'E' or by the earth symbol

coloured GREEN AND YELLOW.

) must be reset

The BROWN coloured wire must be connected

to the terminal, which is marked with the letter

"L" or is coloured RED.

The BLUE coloured wire must be connected to

the terminal, which is marked with the letter "N"

or is coloured BLACK.

Solution

Check to make sure the unit is

NOTE: If the terminals in the plug are not marked

plugged in.

or if you are unsure or in doubt about the installation

Check to make sure the unit is on

of the plug please contact a qualified electrician.

by pressing the power button.

If a 13A 3-pin plug is fitted, it must be an ASTA

Make sure the filters are properly

approved plug, conforming to BS1363 standard.

installed and firmly close the door.

Replacement 3A fuses must be BSI or ASTA

If the Filter Life Indicator (

) is

BS1362 approved.

red, the permanent HEPA filter

should be cleaned.

GUARANTEE

PLEASE KEEP YOUR RECEIPT AS THIS WILL

Check the filter to make sure

they are in good condition.

BE REQUIRED FOR ANY CLAIMS UNDER

Check to ensure nothing is blocking

THIS GUARANTEE.

the air inlet and filtered air outlet.

• This appliance is guaranteed for 2 years.

• In the unlikely event of breakdown from a

Make sure filter bags are

manufacturing related fault, please return it to

removed if present.

the place of purchase, with your till receipt

and a copy of this guarantee.

• The rights and benefits under this guarantee

are additional to your statutory rights which

are not affected by this guarantee.

• Holmes Products (Europe) Ltd undertakes

within the specifiied period, to repair or replace free

of charge, any part of the appliance found to be

defective from a manufacturing fault provided that: