Dickey-John INSTALAB 700 Hızlı Başlangıç Kılavuzu
Ölçüm Cihazları Dickey-John INSTALAB 700 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dickey-John INSTALAB 700 8 sayfaları.
INSTALAB 700 QUICK START GUIDE
Safety notices are one of the primary ways to call attention to potential hazards.
This Safety Alert Symbol identifies important safety messages in this manual. When you see this
symbol, carefully read the message that follows. Be alert to the possibility of personal injury or death.
Use of the word WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Use of the word CAUTION with the Safety Alert Symbol indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Use of the word CAUTION without the safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in equipment damage.
DISCLAIMER
DICKEY-john reserves the right to make engineering refinements or procedural changes that may not be reflected in this manual.
Material included in this manual is for informational purposes and is subject to change without notice.
INTRODUCTION
This quick start guide provides the minimum requirements to begin using the Instalab 700 NIR Grain Analyzer and is organized
according to typical sequential actions for installation, startup, analyzation, and results.
More detailed information is available in the Operator's manual that addresses:
•
Installation
•
Calibrations
•
Sample preparation
•
Navigation
•
Password restrictions
•
System setup
•
Startup
•
Analyzing
•
Results
•
Database Storage and Record Deletion
•
Diagnostics
•
Troubleshooting
•
Maintenance
Instalab 700 Quick Start Guide
11001-1608-201702 Rev B
1