Dickson TH6P2 Başlarken - Sayfa 4

Ses Kaydedici Dickson TH6P2 için çevrimiçi göz atın veya pdf Başlarken indirin. Dickson TH6P2 7 sayfaları. Remote sensing temperature/humidity recorder

Sayfayı Yazdır

PENS

The blue pen has a longer pen arm and records humidity. The red pen has a shorter arm and

records temperature. The pens are offset to allow the red pen to glide under the blue pen. The

blue pen indicates the correct time and the red pen precedes it by 3/16 of an inch.

POWER

The TH6 operates on AC power with an optional 4AA battery backup. Depending on chart

rotation selected and model; battery backup will last approximately 3 days.

Note: Alarm will not operate under battery only power.

LED Indicators

• AC Power with Battery Backup - Solid Green

• AC Power with Low Battery or No Battery - Blinks Red

• Battery Only - Blinks Green

• Battery Only (Low Battery) - Solid Red

PEN

PEN HOME ADJUST

PEN

HOME ADJUST

If over time the pen location does not match the display, you may need to adjust the pens

location on the chart. A Pen Home Adjustment will not affect calibration of the sensor, but rather

corrects for the natural drift that occurs with mechanical moving parts over time.

1. While the unit is on, press and hold both Pen Home

2. Both pens will move to the outer edge of the chart, and then the shorter red

3. If the red pen tip does not line up with the outer chart ring line, use the Adjust

4. Once the shorter red pen is set, press Pen Home

5. If the blue pen tip does not line up with the outer chart ring line, use the Adjust

6. Once the blue pen is set, pressing the Pen Home

7. Each time P P P P en

Note: Pressing the On/Off button will exit the adjustment and return the unit to normal operation.

Each time the Pens Home or On/Off button is pressed, the adjustment currently in progress will

be stored. The unit will take one minute to exit Pens Adjust Mode once the On/Off button is

pressed.

Dickson TH6P Manual V5 052418

1.800.561.8187

solid green. Release the Pen Home

Pen Home and On/Off

Pen Home

green for one second then the LED will turn off.

Note: Press Pen Home

Note:

Pen Home first so the unit will not turn off

Note:

Pen Home

move to the outer chart ring (maximum temperature/RH line).

Adjust- - - - Down

Adjust

Down buttons (on the back of the unit) to move the red pen so that the pen tip is

Adjust

Down

on top of the outer chart ring.

longer blue pen to the out chart ring line.

Adjust

Adjust- - - - Down

Down buttons to move the blue pen so that the pen tip is on top of the outer ring

Adjust

Down

line.

the outer edge of the chart and the shorter red pen will move to the outer chart ring line.

en H H H H ome

ome is pressed the two pens will switch positions (moving the most

ome

recently adjusted position) until On/Off

www.

Pen Home

Pen Home and On/Off

On/Off

On/Off buttons until the LED is

On/Off buttons. The LED will flash amber and

On/Off

Pen Home to switch pen positions moving the

Pen Home

Pen Home button will move the longer blue pen to

Pen Home

On/Off is pressed to exit pen adjust mode.

On/Off

.com

red

red pen will

red

Adjust- - - - Up

Adjust

Up and

Adjust- - - - Up

Adjust

Up and

[email protected]