Alpha Fan HANI-5B/36 LED Kullanım Kılavuzu - Sayfa 5

Fan Alpha Fan HANI-5B/36 LED için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Alpha Fan HANI-5B/36 LED 8 sayfaları.
Ayrıca Alpha Fan HANI-5B/36 LED için: Kullanım Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Step 7

a. Route the LED Wire from Motor throught the Light Kit

b. Install the LED Light Kit on Motor with Light Kit Screw.

c. Connect LED connector from Motor onto LED Light Kit.

d. Install Lamp Shade by twisting in

Install

Lamp

Shade

Step 8

Below shows a complete installation diagram.

Light Kit

Connection

TRANSMITTER LEARNING PROCESS

IMPORTANT : DO NOT CONNECT THIS REMOTE CONTROL CEILING FAN TO DIMMER

SWITCH OR REGULATOR.

The receiver & transmitter is pre-programmed in factory. If you wish to control 2 or more fans using

1 transmitter, the below steps are required.

DO NOT PRESS ANY OTHER BUTTON DURING THIS PROCESS

Step 1

a) Insert the 2 pcs of batteries (provided) into transmitter.

b) Turn on the power supply (wall switch) to the fan.

c) Within 30 sec, press and hold the "LEARN" button for 3 sec. Once the receiver has detected the frequency,

transmitter will "Beep Beep" twice. Programming process is completed and fan is ready to use.

If the fan is not responding to the transmitter, repeat Step 1b.

Transmitter

Learn

Press and hold

for 3 sec