Alpha Fan PRIMA-5B/40 LED Kullanım Kılavuzu - Sayfa 5

Fan Alpha Fan PRIMA-5B/40 LED için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Alpha Fan PRIMA-5B/40 LED 8 sayfaları.

Step 5

a. Connect the Connectors from Fan and Receiver.

b. Connect the wires from the receiver to House's Supply Wire.

c. Connect Earth Wire to House Supply Earth Terminal.

House Supply Wires

Brown (L)

Blue (N)

Orange

Blue

White

Yellow

Grey

Step 6

Install the Blades on Motor with Screw.

Step 7

Install Lamp Shade by twisting in.

Green/Yellow (E)

Green/Yellow(E)

Orange

Blue

Brown (L)

Blue (N)

White

Yellow

Grey

Green/Yellow(E)

Step 8

Below shows a complete installation diagram.

TRANSMITTER LEARNING PROCESS

IMPORTANT : DO NOT CONNECT THIS REMOTE CONTROL CEILING FAN TO DIMMER

SWITCH OR REGULATOR.

The receiver & transmitter is pre-programmed in factory. If you wish to control 2 or more fans using

1 transmitter, the below steps are required.

DO NOT PRESS ANY OTHER BUTTON DURING THIS PROCESS

Step 1

a) Insert the 2 pcs of batteries (provided) into transmitter.

b) Turn on the power supply (wall switch) to the fan.

c) Within 30 sec, press and hold the "LEARN" button for 3 sec. Once the receiver has detected the frequency,

transmitter will "Beep Beep" twice. Programming process is completed and fan is ready to use.

If the fan is not responding to the transmitter, repeat Step 1b.

Transmitter

Learn

Press and hold

for 3 sec