EPC EPC90147 Hızlı Başlangıç Kılavuzu - Sayfa 6
Anakart EPC EPC90147 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. EPC EPC90147 14 sayfaları.
Sayfayı Yazdır
QUICK START GUIDE
MEASUREMENT CONSIDERATIONS
Measurement connections are shown in figure 8.
When measuring the switch node voltage containing
high-frequency content, care must be taken to
provide an accurate high-speed measurement.
An optional two pin header (J33) is provided for
switch-node measurement.
Differential probe is recommended for measuring the
high-side bootstrap voltage (J1). IsoVu probes from
Tektronix has mating MMCX connector.
For regular passive voltage probes (e.g. TPP1000)
measuring switch node using MMCX connector,
probe adaptor is available. PN: 206-0663-xx
NOTE. For information about measurement techniques,
the EPC website offers:
"AN023 Accurately Measuring
High Speed GaN
Transistors" and the How to GaN
educational video series, including:
EPC – POWER CONVERSION TECHNOLOGY LEADER |
HIGH VOLTAGE
Bootstrap
voltage MMCX
(HIGH VOLTAGE!)
HIGH VOLTAGE
Voltage measurement:
Input voltage for Boost,
Output voltage for Buck
(HIGH VOLTAGE!)
HTG09- Measurement
EPC-CO.COM
| ©2022 |
+
V
V
+
(a)
(b)
Figure 8: Measurement points (a) front side, (b) Back side
EPC90147
Voltage measurement:
Input voltage for Buck,
Output voltage for Boost
(HIGH VOLTAGE!)
HIGH VOLTAGE
Switch-node
oscilloscope probe
Ground oscilloscope probe
Switch-node
oscilloscope probe
Ground oscilloscope probe
| 6