Alpha IP FAL 210 1 Series Manuel - Sayfa 8

Kablosuz Erişim Noktası Alpha IP FAL 210 1 Series için çevrimiçi göz atın veya pdf Manuel indirin. Alpha IP FAL 210 1 Series 17 sayfaları.

Installation

5 Installation

5.1

5.2

Warning

Danger to life due to the electrical voltage at the base station!

• Only an authorised electrician may open the device.

• Always disconnect from the mains network and secure against unintended activation before opening.

• Disconnect external voltages and secure against activation.

The wiring of a room-by-room temperature control system depends on several factors and must be

planned and carried through carefully by the installer. The following cross-sections are applicable for

the plug-in/clamping connections:

• solid wire: 0.5 – 1.5 mm²

• flexible wire: 1.0 – 1.5 mm²

• 8 - 9 mm insulation stripped off the wire

The wires of the actuators can be used with factory-mounted end sleeves.