Epcom PROAUDIO SF-4240UC Kullanım Kılavuzu - Sayfa 5

Amplifikatör Epcom PROAUDIO SF-4240UC için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Epcom PROAUDIO SF-4240UC 20 sayfaları. Class d power amplifier

Sayfayı Yazdır

2. GENERAL DESCRIPTION

The new UC series of digital mixer amplifiers are more efficient and a cost-effective solution

specially developed to meet the needs of the global market. It is suitable for commercial audio

installations. Just to meet the needs of emerging markets to provide high-quality equipment at an

affordable price, the UC series mixer amplifiers are equipped with 4R and 100V two-way outputs

and a series of convenient functions, which are flexible and applicable worldwide. The series

combines many convenient and flexible functions, including Bluetooth and USB media player;

low impedance function (4ohm/8ohm) and high impedance output (100V); each output channel is

equipped with a separate bass and treble control.

3. FEATURES

1. 4 channels output, 120W/240W constant impedance or constant voltage high performance

digital mixer amplifier (4-16R/100V).

2. Built-in MP3 recording function.

3. 6-channel independent volume control.

4. The 6-channel audio source can be configured as a matrix to each channel output.

5. INPUT1-4 input with adjustable gain control.

6. The 4 outputs are with independent volume control.

7. Remote microphone input, max can be 4 remote microphones.

8. Built-in MP3 (U disk/SD card) player function.

9. Built-in FM radio function.

10. With high-end TFT display.

11. 4 outputs can remotely control the panel to adjust the circuit.

12. There are distortion, protection, signal, output status indicators.

13. INPUT1-4 channels can be configured with phantom power.

14. INPUT1-4 channels have priority and mixing selection function.

15. Priority input port for EMC alarm.

16. ALARM interface plays the specified alarm music.

17. Built-in Bluetooth function, can be connected to mobile phone/computer, with external high-

gain Bluetooth antenna.

18. 4 mute interfaces can be connected to the fire control interface.

19. Priority: EMC >MUTE >REMOTE MIC >INPUT1-4 >LINE1-2.