epcom TITANIUM TT383VGA Kullanıcı Kılavuzu - Sayfa 2

Genişletici epcom TITANIUM TT383VGA için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. epcom TITANIUM TT383VGA 2 sayfaları. Hdbitt vga over single network cable extender

epcom TITANIUM TT383VGA Kullanıcı Kılavuzu
T hank you for purchasing this product. For optimal performance and
safety, please read the below instructions carefully and keep the
manual for future reference.
• Important safety notice
Please read the below safety instructions carefully before installation and
operation:
* Please pay attention to all the warnings on this device.
* Do not expose this unit to rain, moisture and liquids.
* Do not repair or open this device without a professional's guidance.
* Make sure to have enough vents to avoid product overheating damage.
* Shut off the power and make sure that the environment is safe before
installation.
* Do not plug-in/out the network cables and IR cables during the
operation in order to avoid damaging the cables.
* Only use 5V DC. Make sure that the specifications match in case of using
"'
3
party DC adapters.
1 Introduction
T h is VGA extender incorporates HDbitT transport technology to
extend VGA signal over single cat5/6 cables. It saves cable cost and
supports RGBHV signal input. It can be widely applied for TVs, HD video
camera systems and multimedia field, etc.
2 Features
1) Apply advanced HDbitT transport protocol
2 ) Extend VGA signal over single cat5/6 cables
3 ) Transmit 1080p signals for up to 120 meters
4 ) Supports RGBHV input
5 ) Supports a 3.5mm audio jack
6 ) High-end aluminum alloy enclosure design
7 ) Wall-mountable design for a convenient installation
3 PACKAGE CONTENTS
rn
VGA EXTENDER
VGA EXTENDER
TX x l
RX x l
cm:::[Jm
====llll
3.5mm audio cable
User's manual x 1
4 INSTALL ATION REQUIREMENTS
1. Source device with VGA output port (computer graphics card,
DVD,PS3, HD monitoring equipment etc)
2. Display device with VGA input port
3. UTP/STP Cat5e/6 cable follow standard IEEE-5688
5 Panel desc r iption
5.1 VGA Extender TX sender
©
�JJ'-+- Y - -
__ L_
=='9H9
o
@
m @
© Audio Input
@ Power status indicator
® HDbitTsignal output
(j) Network connection indicator
5.2 VGA Extender RX receiver
© Audio output
@ Power status indicator
® HDbitT signal input
DCSV /2A x 2
(Z} Network connection indicator
6 Installation procedures
1. Prepare Cat5/6 network cable
Follow the IEEE-5688 standard:
1. white and orange
4. blue 5. white and blue
7. white and brown
2. Connection
2.1 Transmit 1080P signal over cat6 up to for up to 394ft (120m)
and 492ft (150m) over higher quality cables.
lll"l
L_.,.___J
PC
©
ri�L
2.2 Router Connection:
By using network router/Switch, achieve unlimited extension.
@@m@
0 Power input (5V DC)
@ Reset button
® Data transmission indicator
® VGA signal input
©
m
0®©
®®
0 Power input (5V DC)
© Reset button
® Data transmission indicator
© VGA signal output
2. orange 3. white and green
6. green
8. brown
""' " '
""' ' ' " '
l l w ll
VGA EXTENDER TX
VGA EXTENDER RX
�---
-+
�l!l::al=l==IC!l�VGAOUT
VGAIN
l�I
CatS/6cable
,_' ---
AudioOUT
Audio!N
®
TV