Axis 240Q Blade Kurulum Kılavuzu - Sayfa 3

Sunucu Axis 240Q Blade için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Axis 240Q Blade 9 sayfaları. Video server
Ayrıca Axis 240Q Blade için: Teknik Özellikler (6 sayfalar), Teknik Özellikler (2 sayfalar), Teknik Özellikler (2 sayfalar), Veri Sayfası (2 sayfalar), Veri Sayfası (2 sayfalar)

Sayfayı Yazdır
Axis 240Q Blade Kurulum Kılavuzu
The Axis Video Server Rack will fit up to 12 rack mounted Axis Video Servers (Blade
Servers). This installation guide describes the hardware installation of the Axis Rack
Mounted Video Server Solution.
To set the IP address and install the video server on your network, please see the AXIS
240Q Installation Guide. For all other aspects of using the product, please see the User's
Manual.

Hardware Inventory

Please contact your dealer if anything is missing or damaged.
Qty
Item
1
Video server
2
Connector
1
Warranty Document
1
Installation Guide
1
CD
1
This Document
AXIS 240Q Blade
Read the following information to familiarize yourself with the
AXIS 240Q Blade video server, making particular note of where
the connectors and indicators are located:

Control Button

See the AXIS 240Q User's Manual for information on using the
control button.
Indicators
Network Amber
Flashes for activity on a 10 Mbit/s network
Green
Flashes for activity on a 100 Mbit/s network
Red
Flashes rapid red for hardware error, together with the Status
indicator
None
No connection
Status
Green
Normal operation
Amber
Flashes during reset to factory default or at firmware upgrade
Red
Flashes rapid red for a hardware error, together with the
Network indicator
Power
Green
Normal operation
Amber
Flashes green/amber during upgrade
AXIS 240Q Blade - Rack Solution Installation Guide
Title/Variants
AXIS 240Q Blade Video Server
14-pin terminal connector block
AXIS 240Q Installation Guide
Documentation and software
AXIS 240Q Blade - Rack Solution Installation Guide
Description
AXIS 240Q Blade
Control
button
Serial
number
P/N: XXXX-YYY-ZZ
S/N: 00408C1A2B3C
Top and bottom
screws are used to
secure the blade
server in the rack
3