Alpha Microsystems AM-990 Servis Kılavuzu - Sayfa 15

Anakart Alpha Microsystems AM-990 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Alpha Microsystems AM-990 15 sayfaları. For authorized service personnel only: am-990 vme service manual
Ayrıca Alpha Microsystems AM-990 için: Servis Kılavuzu (18 sayfalar)

Sayfayı Yazdır

Page 12

4.4Removing and Installing Peripheral Devices

Remove all of the 5-1/4" and 3-1/2" peripheral devices from your old chassis. Install the

peripheral devices in your new chassis using the instructions in this document.

4.5Installing the I/O Rear Panel and Paddle Board Assembly

You have already attached your paddle boards to the rear panel mounting bracket

designed for the new chassis. This assembly installs in exactly the same way as it did in

your old chassis. The bracket is held in place with four screws. Attach the cables that

connect between the paddle boards and the AM-350, AM-520, AM-362, etc...All these

cable connections will be exactly the same as in your old computer.

5.0FINISHING THE JOB

Once all the equipment is installed in the new chassis, you should make sure all the

interface cables are routed properly so they are not damaged when you reinstall the

computer's top cover and side panel.

The only thing left to do is to position the computer in its intended operating position;

plug in all terminal and other types of I/O cables into the computer's rear panel; and the

installation is complete.

AM-990 VME Computer Service Manual

DSS-10523-00, Rev. A00