Alpha Microsystems AM-402 Kurulum Talimatları Kılavuzu - Sayfa 11

Kayıt Ekipmanları Alpha Microsystems AM-402 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Alpha Microsystems AM-402 17 sayfaları. Scsi cd-recorder

Sayfayı Yazdır

MAKACD

After entering the MAKACD command, the following will be displayed:

Initializing SCSI CD-Recorder...

If MAKACD finds multiple possible CD-recorders (including CDROM drives) while scanning

the SCSI bus, the following message will be displayed to allow you to select the drive to use:

Found the following possible CD-Recorders:

Select one of the above devices:

Additional information about the CD-recorder, driver, and media is then displayed:

Using Generic SCSI-MMC CDR driver (CDRMMC)

CD-Recorder located at SCSI id 5

A blank CD is in the CD-Recorder

MAKACD then asks for an optional title for the CD. The title may be up to 60 characters long.

You may enter an optional title for the CD or press RETURN for

none.

Title:

Next MAKACD asks for the AMOS logical drives to copy to the CD, as follows:

Enter the list of disk devices to transfer onto the CD-Recordable

disk.

through dev20:), or may be comma separated, The list is terminated

with a blank line:

Enter the logical drives to be copied and then just a [return] when all

desired drives have been entered.

*DSK0:

*DSK6:

MAKACD will the check the transfer rate of the drives specified to make sure they are fast

enough to supply the continuous data stream required by the CD-recorder. If the speed is less the

300K per second, the program will terminate. If the speed is between 300K and 600K per second,

recording speed will be limited to 1x. If the speed is between 600K and 1000K per second,

recording speed will be limited to 2x. If the speed is greater than 1000k per second, recording

will take place at the maximum speed of the CD-recorder or the speed specified by /SPEED in

the command line, whichever is slower.

DSK0: 64660 blocks. Transfer rate: 1263K per second - ok

DSK6: 64660 blocks. Transfer rate: 1196K per second - ok

Description

xxxxxxxxxxxxxxxxxxxxxxxxxxx

Devices may be entered as a range (ex. dev0: -20 for dev0:

System Commands Reference Manual, Rev. 11

Page 4