Alpha Microsystems AM-402 Kurulum Talimatları Kılavuzu - Sayfa 15
Kayıt Ekipmanları Alpha Microsystems AM-402 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Alpha Microsystems AM-402 17 sayfaları. Scsi cd-recorder
Sayfayı YazdırMAKACD
•
Error - Unable to set desired write mode.
A device error has occurred while attempting to setup the CD-recorder for real mode or
test mode recording.
•
Error - Unable to set recording speed.
A device error has occurred while attempting to setup the CD-recorder for the desired
recording speed.
•
Error - Unable to set write mode.
A device error has occurred while attempting the setup the CD-recorder recording
mode.
•
Error - Unable to write to the CD.
A device error has occurred while attempting to record data on the CD.
•
Fatal SCSI error. Sense key=nn additional sense=nn
CD-recorder device error has occurred. Sense key and additional sense provide further
error information.
•
Please insert a CD-Recordable disk
•
SCSI error - xxxxxxxxx
[sense error message] Code= nn.nn
CD-recorder device error has occurred. Code provides additional SCSI error sense
information.
•
Too slow.
The disk drive is too slow to keep up with the CD-recorder.
•
Warning - Unable to close track.
Device error occurred while closing the current CD track. The CD may or may not be
usable.
•
Warning - Unable to read existing track numbers. Starting with track 0.
Errors concerning the AMOS CD data structure:
•
Calculated and true starting points are different.
Recording will start at sector nnnnnn with a filler of nnnnnn sectors
This is only a warning indicating that recording will start at a different location on the
CD than originally assumed.
•
The AlphaCD logical unit size is greater than 64K blocks which could mean compatibility
problems on AMOS 1.X systems. Press RETURN to continue, or ^C to abort MAKACD:
The logical disk size on the CD will be greater than the maximum size of a traditional
logical drive.
•
Error - Disk geometry calculation was incorrect.
The AMOS hidden sector parameters calculated are invalid.
•
Error getting AMOS data buffer
The system was unable to acquire memory for data buffers.
•
Error - memory previously calculated as available isn't
Memory required for data buffers has disappeared.
•
Error - No devices specified.
User did not specify any AMOS logical disks to be copied to the CD.
•
Error - Unable to calculate AMOS buffer size.
The system was unable to find a buffer size that allows the AlphaCD special sector to
properly recorded.
•
Error - Unable to calculate AMOS disk geometry.
System Commands Reference Manual, Rev. 11
Page 8