Dictator E8 Teknik Kılavuz - Sayfa 18

Kontrol Sistemleri Dictator E8 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Dictator E8 19 sayfaları.

Technical Manual E8

VI /1 Maintenance

VI / 2 Safety Advice

VI / 3 Cleaning

Page 05.023.18

VI. Maintenance / Safety Advice

All functions of the control system E82 have to be checked once a

year.

Certain tensions within the control system might lead to an electrical

discharge, that might destroy the control system. Therefore increased

attention is required, if work has to be done near the control system or

the current carrying cables coming from the control system.

No work on the control system and the whole installation is allowed

while the current is still on. The power supply always has to be switched

off beforehand.

Therefore make sure a lockable switch is installed in the supply line to

the control system, that will cut off the power supply completely.

The casing of the control system always has to be kept closed and

clean. For the cleaning of the casing just use water and soap. Never

use aggressive detergents.

Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 20200703