Alpha Moisture Systems BTP01-PRINTER Hızlı Başlangıç Kılavuzu - Sayfa 2

Yazıcı Alpha Moisture Systems BTP01-PRINTER için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Alpha Moisture Systems BTP01-PRINTER 2 sayfaları. Bluetooth printer

Sayfayı Yazdır

Power Supply Connection

Connect the power cable to the printer

power cable port.

Charge the printer battery as required.

NOTE

Make sure the power cable

end is orientated correctly to

the printer power port before

connecting

The USB connection is not

operational and cannot be

used with the SADPmini2

Paper Replacement

Open the printer paper cover.

If necessary, remove the remaining

core of the old paper roll.

Install the new paper roll as shown.

Align the paper correctly.

Pull the paper out and close the paper

cover.

Press the FEED button to make sure

the paper feeds correctly

Battery Removal and Replacement

Removal: Push the battery clip down

and move the battery away from the

printer casing as shown.

Remove the battery from the printer

casing.

Replacement: Install the battery in the

printer casing.

Push the battery into position in the

printer casing. A clicking sound

indicates the battery is installed

correctly.

Specifications

Dimension 106.5(L) x78(W) x 47(H) mm

Weight 190 g (excluding roll paper)

Operating Temp 0 °C - +40 °C

Storage Temp -20 °C - +60 °C

Operating Humidity < 95%RH

Part No. BTP01-PRINTER

Battery

DC7.4 V, 1.5 A rechargeable Li-ion battery 1500 mAh

Battery charged fully charged in 2 hours with a standby time over 15 days.

Part No. BTP01-BATTERY

Low Power Alarm and Auto Sleeping

If battery charge is low during printing, the power indicator will turn Red to show that there is still

data to be printed. If there is no data to print, the printer will move into a low power sleep mode

after in 2 seconds. It will awaken if FEED button is pressed or data is sent to it.

Paper

Type Thermal Paper

Width 58 mm

Thickness 60-80 μm

Roll Diameter Maximum 40 mm

Part No. BTP01-PAPER

Power Unit

Model ABT015084

AC Voltage Input Range 90-260 Vac

Input Frequency Range 50 or 60 Hz

Rated Working Output DC Voltage 5.4-8.0 V

Rated Working Output DC Current 1.35-1.65 A

Charging condition from red light to green light 0.08 A < I <0.2 A or Vout > 8.45 V

Features over-current and short circuit protection.

Part No. BTP01-CHARGER

Bluetooth

Range 20 m

Passcode 0000