Axis 5800 Hızlı Başlangıç Kılavuzu - Sayfa 2

Yazdırma Sunucusu Axis 5800 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Axis 5800 13 sayfaları. Axis communications print server product brochure
Ayrıca Axis 5800 için: Şartname (6 sayfalar)

Sayfayı Yazdır

Step

Connect the Hardware

1. Make sure that the printer is switched off and that the power supply is disconnected from

the AXIS 5800 Mobile.

2. Locate the serial number, found on the underside label of the AXIS 5800 Mobile, and write

it down. You can use this number to set the IP-address of the print server. Example: Ser.

No. 00408C1802FB

3. Connect your printer(s) to the print server's LPT1 or LPT2 port using a printer cable. Make

sure the Bluetooth antenna is pointing towards the ceiling.

4. Connect your AXIS 5800 Mobile to your network (Ethernet Connector), using a twisted pair

category 5 cable

5. Switch on your printer(s) and make sure the printer is ready for use.

6. Connect the power supply to the Power Supply Connnector. The Network Indicator will

start flashing when the print server is correctly connected to the network.

7. Wait 1 minute and press the test button once. A test page will be printed on the connected

printer, keep it handy during the installation. The test page will show the IP address of the

print server.

LPT2

Bluetooth

Antenna

Power Indicator

Power Supply Connector

LPT1

Network Indicator

Ethernet

Connector

(10 base &

100 base TX)

Test Button