Alpha Networks PT-3152 Hızlı Kurulum Kılavuzu - Sayfa 5

Güvenlik Kamerası Alpha Networks PT-3152 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Alpha Networks PT-3152 11 sayfaları.

Hardware Installation

Attach the Metal Plate

1. Remove the two rubber

pads under the base of

the Camera.

2. Slide the metal plate onto

the base of the Camera,

making sure that the two

holes on the base of the

Camera align with the

two screw holes on the

base of the Camera.

3. Secure the metal plate to the base of the Camera with the two screws provided.

4. You can: install the camera to the ceiling using two ceiling screws ( ); or, install

the camera to the wall using two wall screws ( ).

Connect the Ethernet Cable

Connect an Ethernet cable to

the network cable connector

located on the camera's rear

panel, and then connect it to the

network.

Connect the Power Adapter

Connect

the

external

adapter to the DC power input

connector

located

camera's rear panel, and then

connect it to your wall outlet.

(Tip: You can confirm the power

source is supplied from the

Power LED on the camera.)

PT-3152(C)/PT-3153(C) Quick Installation Guide

power

the