Epever IPower IP1500-22 Kullanıcı Kılavuzu - Sayfa 8
İnvertör Epever IPower IP1500-22 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epever IPower IP1500-22 20 sayfaları. Pure sine wave inverter
Sayfayı Yazdır
Operation Steps:
Step 1: Turn off the switch of inverter
Step 2: Connect the battery ('+' terminal with red line, '-'with black
line). Do not connect them by contraries, or the power inverter will
be damaged.
Step 3: Connect the protective grounding to the ground
Step 4: Connect the AC load to the AC outlet
Step 5: Switch on the fuse or breaker. Switch the inverter to ON
and then turn on the loads one by one. Check the operation state of
both power inverter and loads. 'Green' of the Working indicator
means the state is normal.
Step 6: If there are different loads, it is suggested that turn on the
load with large startup current first, such as television, then turn on
the load such as lamp when the inverter works stably.
Step 7: If the Fault indicator is 'Red' and the buzzer alarms or no
output when you turn on devices, switch off the loads and
power inverter immediately. Check the system by referring to the
troubleshooting guide. Turn on the devices again according to the
operation methods after the failure is removed.
5