Axis STAV20 Kullanıcı Kılavuzu - Sayfa 11
Raflar ve Standlar Axis STAV20 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Axis STAV20 16 sayfaları. Vertical automatic stand
Sayfayı Yazdır
_____________________________________________________________________________________________________________________
ADVANCED
STEP 1
Action:
Move Down
Speed:
75mm/min
End:
Travel
Distance: 10.00mm
SAVE
SAVE&LOAD
To configure each Step user can select from below options:
Action:
Speed:
End:
After all configuration is done, user by pressing
Save&Load or Exit.
After selecting Load below screen will show up:
Profile 1
Cycle No:
Step No:
Speed:
Distance:
Force:
Start
Select
s
g
EXIT
Move Up – moving up the force meter
Move Down – moving down the force meter
Hold – no movement
Const. Force – automatic move that is maintaining constant force
on the force meter
Inscribing movement speed (20-300 mm/min range)
Travel – Distance option will show up where user can inscribe
travel in [mm].
Time – Duration option will show where user can inscribe time in
[s].
Sample break – automatic detection of sample break
Force – Condition (greater or less) and Force (value in Newtons)
options will show up
Position – Point option will show where user can inscribe exact
position point in [mm]
s
0
0
0 mm/min
0.00 mm
0,00 N
s
USER MANUAL
The picture on the left shows example of
setting Step 1.
Actual data of the measurement will show
up. User can by using the knob select Start
to start the measurement or Select to select
other motion program.
key can select to Save ,
11