Epever RTU 4G F Kullanıcı Kılavuzu - Sayfa 2

Dokunmatik terminaller Epever RTU 4G F için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epever RTU 4G F 2 sayfaları.

Sayfayı Yazdır

HUIZHOU EPEVER TECHNOLOGY CO., LTD

❷ Login

2. Register & Login

❶ Register

3. Add device

Note: Before adding the RTU module and the connected device to the cloud server, ensure all the cable connections are right, and the

Step 1: Log in to the APP

Step 2: Select the currently

and click the

icon to add

connected

a new gateway by "Scan

(4G-DTU-A).

QR code" or "Type in" (take

the "Type in" as an example

below).

7. Troubleshooting

Faults

Power indicator off

WORK Indicator on solid

The product emits smoke with a

pungent smell.

The device can't register to the

network.

Parameters can't be configured.

8. Specifications

Model

Parameter

Input voltage

Power consumption

Average: 21mA~50mA, Maximum: 54mA(12V)

Working frequency

Configuration methods

Transmission method

Communication method

Baud Rate

Antenna connector

Antenna gain

Step 3: Input the gateway

gateway

type

information

gateway label for the

"Gateway SN"). Click the

"Next Step" to enter the

device-adding interface.

Solutions

1. Check whether to supply power to the terminal. 2. Check whether the indicators are damaged.

3. If powered, check whether the positive and negative poles of the power supply are connected inversely. The input terminal

of the EPEVER RTU 4G F is equipped with anti-reverse protection. The reverse connection shall not cause fatal damage

to the product. However, it affects the normal running before the correct connection is restored.

After power on, the WORK indicator is on solid in 60 seconds. While it cannot flash after 60 seconds, please check:

1. Check whether the SIM card is inserted correctly. 2. Confirm that the 4G service has been activated.

WORK indicator on solid again after running for a period, please check:

1. Check whether the cloud server is normally running. 2. Check whether the SIM card is loose or arrear.

The actual input voltage exceeds the rated voltage of the EPEVER RTU 4G F, causing the internal components to burn out.

Don't hesitate to contact the supplier in time and send it to the manufacturer.

1. Check whether the SIM card is inserted correctly. 2. Confirm that the 4G service has been activated.

3. Check whether the input power is sufficient. The input voltage shall be DC 9~36V.

1. Check whether the connection to the PC is correct. 2. Check whether the serial port's selection is correct.

EPEVER RTU 4G F

DC 9~36V

LTE FDD

B1/B3/B7/B8/B20

GSM

900/1800MHz

Serial port AT command, Network AT

command

TCP/UDP, HTTPD, SMS transparent

transmission

RS485

115200bps

SMA built-in cellular antenna connector

3dBi

TEL: +86-752-3889706

Download the APP and open it, click the "Sign

up now" icon. Input the user name, email,

verification code, and password, and then

select the user type and system type from the

drop-down box. Tick to agree with the privacy

agreement and click the "Sign Up."

Step 4: The device adding

(See

the

is the same as the gateway

adding, adding the device

via "Scan QR code" or

"Type in" (take the "Type

in" as an example below).

Work temperature

Enclosure

Humidity range

Dimensions

Mounting Holes

Net Weight

9. Disclaimers

The warranty does not apply to the following conditions:

 Damage caused by improper use or inappropriate environment.

 The parameter setting exceeds the terminal's limit.

 Damage caused by working temperature exceeds the rated range.

 Unauthorized dismantling or attempted repair.

 Damage caused by force majeure.

 Damage occurred during transportation or handling.

Any changes without prior notice!

Website: www.epever.com

After registering, return to the APP. Input

the user name and password, select

country, tick the "Remember me" to log

in quickly next time, and click the "Login"

button to enter the APP.

SIM card is normal.

Step 5: Select the device

Step

type to enter the device

information and click the

"Next Step" to enter the

information interface.

device list interface. Now,

you can remote monitor

the device by the APP.

-30℃~+75℃

IP30

5%~95% (N.C.)

86mm ×82.6mm ×25mm

Φ4 / Φ11

<110g

Version number: V1.1

Input

device