Acculab ACCULAB VICON VIC-2MG Kullanım Talimatları Kılavuzu - Sayfa 16
Terazi Acculab ACCULAB VICON VIC-2MG için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Acculab ACCULAB VICON VIC-2MG 16 sayfaları. Electronic precision scales
Sayfayı Yazdır
Accessories (Options)
Product
Data interface, mounting kit
– RS-232 interface with cable
– USB interface with cable
Data printer
Lock-down capability
(for anti-theft locking device)
Calibration weights
– for VIC-5101 (5 kg; F2)
– for VIC-3101 (2 kg; F2)
– for VIC-1501 (1 kg; M1)
– for VIC-10KG (5 kg; M1)
– for VIC-6KG (5 kg; M2)
– for VIC-4KG (2 kg; M2)
– for weight compartment,
(right side), (100 g;F1)
C Marking
The balance/scale complies with the following EC Directives
and European Standards:
Council Directive 89/336/EEC "Electromagnetic
compatibility (EMC)"
Applicable European Standards:
Limitation of emissions:
In accordance with product standard EN 61326-1 Class B
(residential area)
Defined immunity to interference:
in accordance with product standard EN 61326-1
(minimum test requirements, non-continuous operation)
Important Note:
The operator shall be responsible for any modifications to
Acculab equipment and must check and, if necessary, correct
these modifications.
On request, Acculab will provide information on the minimum
operating specifications (in accordance with the Standards
listed above for defined immunity to interference).
16
Order No.
Product
In-use cover:
YADAP-RS
– for models without glass draft shield Available on request
YADAP-USB
– for models with glass draft shield
Round glas draft shield
YDP03-0CE
(25 mm high)
LC-1
Weighing pan: – Round
Pan support:
YCW6548-00
YCW6248-00
Leveling feet (set of one
YCW615-00
adjustable foot and one fixed foot)
YCW655-00
Plug for level indicator port
YCW656-00
Covers:
YCW626-00
– Battery compartment
– Interface port
Available on request
– Below-balance/scale port
Weight compartment
73/22/EEC "Electrical equipment designed for
use within certain voltage limits"
Applicable European Standards:
EN 60950
Safety of information technology equipment including electrical
business equipment
EN 61010
Safety requirements for electrical equipment for measurement,
control and laboratory use
Part 1: General requirements
If you use electrical equipment in installations
and under ambient conditions requiring higher safety standards,
you must comply with the provisions as specified in the
applicable regulations for installation in your country.
Order No.
Available on request
Available on request
Available on request
– Rectangular
Available on request
– Round
Available on request
– Rectangular
Available on request
Available on request
Available on request
Available on request
Available on request
Available on request
Available on request