DieHard 200.71486 Operatör El Kitabı - Sayfa 6
Uzaktan Çalıştırıcı DieHard 200.71486 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. DieHard 200.71486 8 sayfaları. Jump starter and dc power source
Ayrıca DieHard 200.71486 için: Kullanıcı El Kitabı (8 sayfalar)
- 1. Table of Contents
- 2. IMPORTANT Safety INSTRUCTIONS
- 3. PRODUCT Features
- 4. Charging the INTERNAL Battery
- 5. JUMP-Starting a Vehicle Engine
- 6. Powering a 12V DC Device
- 7. DC ELECTRICAL Device Example RUN-TIME CHART
- 8. Using the Built-IN Light
- 9. Led Indicators
- 10. Storage and MAINTENANCE
- 11. 10. Specifications
- 12. 11. Accessories and Replacement Parts
5.4
Charge the Portable Power 750 as soon as possible after each use.
Because the DC power outlet is internally wired directly to the internal
battery, extended operation of a 12V DC device may result in excessive
battery drain.
6.
12v DC ELECTRICAL DEvICE ExAMPLE RUN-TIME CHART
Appliance Type
Fluorescent Lights, Cellular Phones
Radios, Depth Finders, Fans
Camcorders, DVD Players, Spotlights
Electrical Tools, Bilge Pumps
Electric Coolers
Air Compressors, Car Vacuums
*NOTE: Estimated run-times. Actual time may vary. Times are based on
the internal battery being new, fully charged and operated at room tem-
perature.
7.
USINg THE bUILT-IN LIgHT
7.1
Position the 750 on a flat, stable surface near the intended work area.
7.2
Turn the Light/Display switch to the LIgHT position. The light will turn on
and illuminate your work area.
NOTE: With a fully charged internal battery, the built-in light should
provide 18 to 30 hours of continuous useful light, depending on ambient
conditions.
7.3
Turn the Light/Display switch to the OFF position when work is completed.
7.4
Charge the 750 as soon as possible after using the built-in light.
Estimated Power
4 Watts
9 Watts
15 Watts
24 Watts
48 Watts
80 Watts
4
•
•
Estimated
Time*
20 Hours
14 Hours
8 Hours
5 Hours
2 Hours
1 Hour