DieHard 28.71522 Operatör El Kitabı - Sayfa 7

İnvertör DieHard 28.71522 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. DieHard 28.71522 11 sayfaları. 140w power inverter
Ayrıca DieHard 28.71522 için: Operatör El Kitabı (17 sayfalar)

Sayfayı Yazdır

To calculate the continuous load: Continuous Load = AMPS x 120 (AC Voltage).

Always run a test to establish whether the inverter will operate a

particular piece of equipment or device. In the event of a power overload, the inverter

is designed to automatically shut down. This safety feature prevents damaging the

inverter while testing devices and equipment within the wattage range of the inverter.

This inverter is designed to power 100 watt devices or less when

used with the vehicle 12 volt accessory port. To use the full 140 watt output you must

purchase a 12 volt accessory outlet to battery clips adapter and connect the inverter

directly to the battery.

NOTE: The 100 watt limit is to accommodate the fuse ratings for all vehicles. Some

vehicles may allow the full output. If the vehicle's fuse blows when you switch on

the device you are trying to use, you have to either use a smaller device or you

must purchase the 12 volt accessory outlet to battery clips adapter and connect the

inverter directly to the battery.

This inverter uses a nonsinusoidal waveform. Therefore we do not

recommend you use it to power the following devices:

Switch Mode Power Supplies;

Linear Power Supplies;

Class 2 Transformers;

Line Filter Capacitors;

Shaded Pole Motors;

Fan Motors;

Microwave Ovens;

Fluorescent and High Intensity Lamps (with a Ballast); and

Transformerless Battery Chargers.

Doing so, may cause the device to run warmer or overheat.

• 4 •