DieHard 200.71230 Operatör El Kitabı - Sayfa 8
Otomobil Akü Şarj Cihazı DieHard 200.71230 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. DieHard 200.71230 20 sayfaları. Battery charger 40/2 amp manual 200 amp engine starter
Ayrıca DieHard 200.71230 için: Kullanıcı El Kitabı (14 sayfalar), Kullanıcı El Kitabı (14 sayfalar)

8.
BATTERY ChARGING - AC CONNECTIONS
8.1
for all grounded cord-connected battery chargers:
•
GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS
– The charger should be grounded to reduce the risk of electric shock.
The charger is equipped with an electric cord having an equipment-
grounding conductor and a grounding plug. The plug must be plugged
into an outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
•
dANGER
the outlet, have the proper outlet installed by a qualified electrician. An
improper connection can result in a risk of an electric shock.
8.2
For all grounded, cord-connected battery chargers with an input rating less
than 15-amperes and intended for use on a nominal 120-volt circuit:
•
This battery charger is for use on a nominal 120-volt circuit, and has a
grounding plug that looks like the plug illustrated in sketch A in Figure 8.4.
A temporary adaptor, which looks like the adapter illustrated in sketches
B and C, may be used to connect this plug to a two-pole receptacle as
shown in sketch B if a properly grounded outlet is not available. The tem-
porary adapter should be used only until a properly grounded outlet can
be installed by a qualified electrician.
•
DANGER – Before using an adapter as illustrated, be certain that the
center screw of the outlet plate is grounded. The green-colored rigid
ear or lug extending from the adapter must be connected to a properly
grounded outlet – make certain it is grounded. If necessary, replace the
original outlet cover plate screw with a longer screw that will secure the
adapter ear or lug to the outlet cover plate and make a ground connec-
tion to the grounded outlet.
– Never alter the AC cord or plug provided – if it will not fit
6
•
•