Diehl Hydrus Kurulum ve Kullanım Kılavuzu - Sayfa 11

Ölçüm Cihazları Diehl Hydrus için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Diehl Hydrus 20 sayfaları. Ultrasonic water meter

Sayfayı Yazdır
Diehl Hydrus Kurulum ve Kullanım Kılavuzu
English
An optical pushbutton (see item 12) is positioned on the front panel of the
HYDRUS. By using the pushbutton the individual display loops are shown.
To save battery life, the display turns off if no control actions are taken for
4 minutes. By pressing the optical pushbutton the display becomes active
again and the current status appears in the display for about 2 seconds.
If there is a fault, an error message appears, E -- 7 -- A (air in the pipe),
for example.
Factory setting for the operating mode of the optical pushbut-
ton (short button press):
ƒ
Error message
ƒ
Total volume
ƒ
Current flow
ƒ
Temperature
ƒ
High resolution reading
ƒ
Software
ƒ
Display test
The loop settings can be customized using the IZAR@MOBILE2
software.
Download the software from the Internet at https://www2.diehl.
com/metering/en/diehl-metering/support-center/downloads.
HYDRUS
-11-