Olympus Camedia D-575ZOOM Hızlı Başlangıç Kılavuzu - Sayfa 2

Dijital Kamera Olympus Camedia D-575ZOOM için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Olympus Camedia D-575ZOOM 2 sayfaları. D-575 zoom quick start guide (portuguese)
Ayrıca Olympus Camedia D-575ZOOM için: (Portekizce) Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Olympus Camedia D-575ZOOM Hızlı Başlangıç Kılavuzu

qsge_pquick.fm 2 ページ２００３年１２月１５日　月曜日　午前１０時３７分

TAKING PICTURES

There are two ways to compose your subject: using the

monitor or with the viewfinder. Depending upon the shooting

situation, there is advantages to each method. Please refer

to the printed Basic Manual for more information.

Taking a Picture with the Monitor

• Open the lens barrier fully.

• Decide the composition while looking at the image on the

monitor.

Icons representing camera settings appear on the

monitor, telling you important information such as the

Flash and record modes, battery life, and the number of

frames remaining.

• Press the shutter button halfway. The green lamp will light

steadily when the focus and exposure are set.

• Press the shutter button completely to take the picture. A

short beep confirms your picture has been taken.

VIEWING AND

ERASING PICTURES

With a Digital camera, you can easily view the photos you

want—and delete the ones you don't.

Viewing Pictures

There are two ways to access the Playback mode:

• If the camera is OFF and the lens barrier closed, press

once.

• If the camera is in the shooting mode with the lens barrier

fully open, press

(QUICK VIEW).

The last picture taken appears in the monitor. Use

to scroll though all the images saved on your xD-Picture

Card.

When you are finished reviewing your pictures:

• Press

to turn the monitor off.

• To return to the shooting mode, press the shutter button

halfway.

CONNECTING THE CAMERA

TO A COMPUTER

TIP

Olympus recommends using the optional AC adapter to ensure a consistent

power supply when downloading images.

Make sure that the camera is turned off before connecting

it to your computer.

Windows 98 users must install the "USB Driver for

Windows 98" software before connecting the Digital

camera to the computer. Refer to the Software Installation

Guide for complete information.

INSTALLING THE CAMERA

SOFTWARE

You've now mastered the basic functionality of your new Olympus

Digital Camera! You are now ready to begin exploring the possibilities

that digital photography brings to your computer. Activities such as

photo editing, printing, and much more are only steps away!

About the Olympus CAMEDIA Master CD-ROM

Your Olympus Digital Camera comes bundled with a suite of software and documentation.

The CD includes:

• CAMEDIA Master: To download pictures from the camera, view, organize, retouch and print

your digital photos and movies.

• USB Driver for Windows 98: This utility must be installed to allow the camera to communicate

with your computer if it uses the Microsoft Windows 98 operating system.

• Olympus Digital Camera Reference Manual: A complete reference guide in digital form,

saved on the CD in PDF format.

You are now ready to install the computer software.

• Open the CAMEDIA Master CD-ROM package and locate the Software Installation Guide in

the language you wish to use.

• Continue to follow the step-by-step instructions for installing the software, and enjoy your new

digital photo processing capabilities!

Taking a Picture with the Viewfinder

• Open the lens barrier fully.

• Frame your subjects using the AF

target mark in the viewfinder.

• Press the shutter button halfway.

The Digital camera confirms the focus and exposure are

properly set when the green lamp in the viewfinder lights

steadily.The orange lamp lights up when it is

recommended to use the flash and/or when the flash is

recharging (when blinking) or ready to fire (when steady).

• Press the shutter button completely to take the picture.

A short beep confirms your picture has been taken.

Zooming

This Digital camera features a zoom lens, allowing you

to get closer to action, or capture wide-angle shots and

get everything into the picture.

Push to zoom out

• Push the zoom lever to zoom out and get everything into

the picture.

• Pull the zoom lever to choose telephoto shooting and get

closer to the action.

Erasing Pictures

Once erased, pictures cannot be restored.

The beauty of digital photography is your ability to keep

the photos you want, delete the rest, and reuse empty

memory space to take new pictures. This Digital camera

offers two ways to permanently erase unwanted digital

photos:

Single-Frame Erase: Deletes only the picture currently

displayed in the monitor.

• With the lens barrier closed, press

and use the arrow

pad to display the picture you want to erase.

• Press

to select

ERASE.

• Press

to select YES, and then press

TIP

Images can also be erased while in the "Quick View" mode

described in step 5a. This makes it easy to quickly erase a

picture that you just took.

Olympus makes it simple to connect the Digital camera to your

computer.

• Turn the camera off.

• Plug the supplied USB cable into the USB connector on your

camera and computer as illustrated on the right.

• The camera turns on automatically.

• The monitor turns on and the selection screen for the USB

connection is displayed.

• Press

to select PC, and then press

The camera starts communicating with the PC.

Additional Camera Features

This Digital camera offers a host of advanced features to expand your creativity. Here's just a small sampling.

See the Basic Manual for details on these capabilities, and more!

• 7 Scene Program Shooting Modes: By using the on-line mode dial (virtual dial), you can easily select

the camera settings that most closely match your shooting situation.

• Sequential Shooting: Take a rapid succession of still pictures.

• Still Picture Editing: Edit still pictures and store them as new pictures.

• Macro Mode: For close-ups as tight as 0.7 ft. (0.2m), select Macro Mode.

• Movie Recording: Yes, this Digital camera records movies!

• Two-in-one Pictures: Combine two separate images taken in succession and store them as a single picture.

• Close-up Playback: Enlarge the pictures in the monitor to check details of the selected image.

• Index Display: View several thumbnail pictures on the monitor at once.

• Protecting Pictures: Prevents you from accidentally erasing photos.

• Video Playback: View your pictures and movies on a television monitor.

• Panorama Shooting: Connect overlapping images into a single picture using the panorama mode and

Olympus CAMEDIA Master software.

TIP

Remember to complete and return your Registration Card (not provided in some areas), and keep all camera

documentation handy.

Technical Support (USA)

1-888-553-4448 (Toll-free)

8:00 AM - 10:00 PM ET

Monday - Friday

Flash Modes

This Digital camera features multiple flash modes.

Orange lamp

Please note that not all flash modes are available

depending on the shooting mode selected.

Green lamp

Icon

Flash Mode

Auto-flash

The camera automatically decides if the flash is needed.

indication

Red-eye

Reduces incidence of red-eye by emitting pre-flashes to

Reduction Flash

shrink pupil size before firing the main flash. The strobe

effect is normal operation for this mode.

Fill-in Flash

The flash always fires with every picture.

Flash Off

Turns the flash off for times when flash photography is

prohibited or not desired. The flash never fires.

With the shutter button depressed halfway, the flash is

ready to fire when the

orange lamp next to the viewfinder lights. When the

orange lamp is blinking, the flash is charging.

Number of Storable Pictures

Your digital camera can handle xD-Picture Cards from

16 MB to 512 MB. The number of storable pictures

depends on the image quality selected.

See the Reference Manual for complete descriptions of

each recording mode and the storable frame capacity for

Pull to zoom in

that of xD-Picture Card.

TIP

To find out how many frames you have left, turn on the monitor

and look for the number in the lower right corner. Remember,

you can always delete unwanted pictures to make room for

more. (See Step 5.)

All-Frame Erase: Deletes all pictures on the xD-Picture

Card in one operation, except for pictures you have

protected.

• With the lens barrier closed, press

• Press

, then press

• Use

to select the CARD tab, then press

access the CARD SETUP screen.

•

ALL ERASE should be highlighted. Press

• As a safeguard, the Digital camera will ask you to select

YES or NO to confirm erasing, as this process permanently

deletes all unprotected pictures. Select YES and press

on the USB screen.

European Technical Customer Support

00800 - 67 10 83 00 (Toll-free)

+49 180 5 - 67 10 83 or +49 40 - 237 73 899

(Charged)

9:00 AM - 6:00 PM MET

Monday - Friday

Description

indicator in the monitor or the

to select MODE MENU.

twice to