Olympus DP12 Talimatlar Kılavuzu - Sayfa 16

Dijital Kamera Olympus DP12 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus DP12 48 sayfaları. Microscope digital camera system

BASIC OPERATIONS

}After installing the SmartMedia, press the main switch 1 of the control box to turn it ON. (Fig. 7)

· The LCD panel shown in Fig. 8 shows the setup before turning power ON and the number of remaining pictures 2 in the

current picture quality mode (see page 21).

· After turning the camera system ON, first set the current and date and time (see page 23).

# When the number of remaining pictures becomes

· As the data amount is variable depending on the recording object, the actual number that can be

NOTES

recorded may sometimes exceed the displayed number of remaining pictures. Also, there may be cases

in which the number of remaining pictures does not decrease even after recording a picture or does not

increase even after erasing a picture.

· The number of remaining pictures is also variable depending on the capacity of each SmartMedia card.

· The number of remaining pictures is also variable when the SmartMedia card contains a DPOF print

reservation file, etc.

· The SmartMedia card has a service life. The available capacity may decrease depending on the status of

the flash memory incorporated in the SmartMedia.

· "999" is displayed when the number of remaining pictures is 999 or more.

Fig. 9

Fig. 7

Selecting the Record Mode (MODE, EXPOSE)

}There are two record modes, the REC AUTO (automatic) and REC MANU.

...

(manual) modes.

1. Press the MODE button 1 so that

AUTO" or "REC MANU.".

# When "REC MANU." is selected, it is required to set the exposure

time.

2. To set the exposure time, press either MOVE button

}Pressing

60 sec.)

The exposure time is displayed in the range from 1/4000 to 8 sec. (at ISO

25). In the display 4, 1/4000 sec. is show as

3. Make sure that the specimen is in focus, and then press the EXPOSE

button 5 to record the picture. The CARD access indicator 6 blinks

during recording.

, "

" and "

" on the LCD panel blink.

decreases the exposure time and

Fig. 8

(Fig. 9)

2 on the LCD panel indicates "REC

increase it. (Factory setup: 1/

and 8 sec. is shown

DP12