AccuLine 40-6610 Kullanım Kılavuzu - Sayfa 8

Lazer Seviyesi AccuLine 40-6610 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AccuLine 40-6610 15 sayfaları. Self-leveling 3-line laser level

Sayfayı Yazdır

40-6600_6610

7. Using the Product

Unlocking

1. The unit should be in locked state when it is not in use. Unlock the

unit by rotating the base clockwise (according to indicated direction

shown on the unit) to set it to unlocked position when you start to

use it. Then you can move the unit slightly to observe through

window whether the internal mechanical system is moving. The

unit can be locked by rotating base in opposite direction.

Leveling Surface

3.5 degree

2. Place the unit on a relatively level surface like a table, floor, etc

during operation.

3. The surface should be as level as possible. If its tilt is beyond 3.5°,

the self-leveling system will become ineffective.

4. Unlock the unit and position it on a surface. If the laser beam

flashes with audible alarm, this indicates that the unit is beyond

its self-leveling range. Please reposition the unit until no beam

flashing and audible alarms occur.

5. Return the unit to its locked position and put it in carrying case while

it is not in use. This avoids accidental damage during transport or storage.

4/22/05

4:56 PM

Page 8

Indicator Line

Locking Indication