Olympus DS-F1 Kullanıcı Kılavuzu - Sayfa 6
Ses Kaydedici Olympus DS-F1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Olympus DS-F1 30 sayfaları.
Installing the battery
This device uses a lithium-ion battery specified by
Olympus (LI-92B). Do not use any other type of
EN
battery.
1
To open the battery cover, slide the
battery cover lock release lever in the
direction of the arrow.
2
With the label facing up, align the
terminals on the device and the
battery, then press down in at A, and
set the battery into place by pressing
it inward at B.
As shown, set the battery so that it tucks under the
protruding section of the device.
6
3
Slide the battery cover until it is
completely closed.
NOTE
• Be sure to firmly close the battery cover (slide
until the battery cover lock clicks).
• Do not close the battery cover if the battery is
not completely inserted.
• Check for any metallic foreign matter or dust
on the terminal of the battery.
• Do not use a battery other than that
specified.
• Turn OFF the device before removing the
battery. Removing the battery while the
device is still in use may cause malfunctions,
file corruption or file loss.
• Remove the battery if you are not going to
use the device for an extended period of
time.
• After removing the battery, it may become
necessary to re-set the time and date if you
leave the battery out of the device for more
than 15 minutes or if you remove the battery
right after loading it into the device.