Olympus VN2100PC - VN 2100PC 64 MB Digital Voice Recorder Talimatlar Kılavuzu - Sayfa 2
Ses Kaydedici Olympus VN2100PC - VN 2100PC 64 MB Digital Voice Recorder için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus VN2100PC - VN 2100PC 64 MB Digital Voice Recorder 11 sayfaları. Digital voice recorder
Ayrıca Olympus VN2100PC - VN 2100PC 64 MB Digital Voice Recorder için: Sürücü El Kitabı (1 sayfalar), Talimatlar (2 sayfalar), Talimatlar (2 sayfalar)
Sayfayı Yazdır
Getting Started
4
Identification of Parts
Built-in Microphone
Microphone jack
Hold switch
STOP button
USB terminal
PLAY button
0 (Rewind) button
FOLDER/INDEX button
Battery cover
4
Inserting Batteries
Built-in speaker
An optional Ni-MH Rechargeable Battery (BR401) from Olympus can be used for the recorder.
Replacing Batteries
When
appears on the display, replace the batteries as soon as possible. Size-AAA alkaline
batteries are recommended. When the batteries are depleted,
recorder shuts off. It is recommended to set the HOLD switch to the HOLD position before you replace
batteries to maintain the current settings (Time/Date, etc.). For your convenience,the recorder also
logs the current settings in nonvolatile memory at hourly intervals.
4
Power Supply
The HOLD switch functions as a power button. When you
do not use the recorder, set the HOLD switch to the HOLD
position while the recorder is stopped. This will power off
the recorder and minimize the battery drain.
Power on...Reset the HOLD switch.
Power off...Set the HOLD switch to the HOLD position.
Standby Mode and Display Shut Off
If the recorder is stopped or paused for 60 minutes or longer during recording or play back,
it goes into Standby (power-save) mode, and the display shuts off. To exit Standby mode
and turn on the display, press any button.
*
Lightly press down on the
1
arrow and slide the battery
cover open.
Insert two size-AAA alkaline
2
batteries, observing the correct
polarity.
Close
3
completely.
Time/Date screen appears. The hour
indicator flashes, indicating the start of the
Time/Date setup process. (See "Setting
Time/Date (TIME)" for details)
- 2 -
Earphone jack
Display (LCD panel)
Record/play indicator light
REC (Record) button
+ button
9 (Fast Forward) button
– button
DISPLAY/MENU button
ERASE button
*
PC (USB) terminal....
VN-1100PC/VN-2100PC/VN-3100PC
the
battery
appears on the display, and the
cover