Olympus BHTU Komple Söküm, Temizlik ve Yeniden Montaj - Sayfa 18
Mikroskop Olympus BHTU için çevrimiçi göz atın veya pdf Komple Söküm, Temizlik ve Yeniden Montaj indirin. Olympus BHTU 19 sayfaları. Reverse nosepiece
Ayrıca Olympus BHTU için: Talimatlar Kılavuzu (22 sayfalar)
phase annuli will not be able to hold an acceptable
alignment due to variations in objective indexing.
The other problem that may be seen is caused by
overall float of the revolving turret, relative to the
center point of the stationary base. If there is excess
play in the center-pivot ball, such that the turret is not
held in the exact center point, the whole turret may
move slightly, resulting in poor objective centering and
all that that entails. This problem may be encountered
if the threaded retaining ring has not been properly
snugged down, or if the center pivot-adjustment screw
has not been properly adjusted to remove the play in
the center-pivot mechanism.
How to Contact the Author
Please feel free to direct any questions or comments
regarding this document (or Olympus BH-2 microscopes
in general) to the author at the email address listed on
the cover of this document.
Original Olympus Documentation
Scanned versions of the following PDFs are available for
download at various microscope-related hobbyist sites
on the internet. These can also be found by searching
for the titles in an internet search engine, such as
Google.
Olympus Research Microscope BH2 Repair Manual
Olympus Research Microscopes Series BH2 (BHS) Repair Manual
Complete Teardown, Cleaning, and Reassembly of the Olympus BHSU/BHTU Reverse Nosepiece Assembly
Revision 3
Page 18 of 19