Olympus BX43 Talimatlar Kılavuzu - Sayfa 17

Mikroskop Olympus BX43 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus BX43 48 sayfaları. System microscope

USING THE CONTROLS

Fig. 10

Fig. 11

Fig. 12

Adjusting the Brightness

1. When the LED lamp is used for observation, turn the LED brightness

adjustment knob @ clockwise to make illumination brighter.

2. When the halogen bulb is used for observation, adjust the brightness

adjustment knob 2 of the TL4 power supply unit.

Setting the LIM Brightness

} LIM stands for Light Intensity Manager. It is effective when the BX43-5RES

revolving nosepiece with sensor and the U-LHLEDC LED lamp housing

are used.

} The desired brightness can be set per objective. Once the brightness for

the objectives is set, selecting an objective adjusts the LED brightness

automatically provided that the LIM ON-OFF switch @ is set to "ON" (which

is indicated by the lighting of the LIM indicator 2).

1. Press the LIM ON-OFF switch @ to "OFF" (so that the LIM indicator 2 is

extinguished).

2. Engage a low-power objective in the light path and bring the specimen

in focus.

3. Rotate the brightness adjustment knob 3 for optimum brightness for

observation.

4. Press the LIM setting switch | to enter the current brightness.

5. Set the optimum brightness for the mounted objectives by repeating the

above for each of them.

To modify the LIM setting:

Engage the objective you want to set the new LIM setting in the light path,

set the LIM ON-OFF switch to "OFF," and perform steps 3 and 4 above.

BX43

(Fig. 10)

(Fig. 12)