Olympus BXFM-ILHS Talimatlar Kılavuzu - Sayfa 26

Mikroskop Olympus BXFM-ILHS için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus BXFM-ILHS 36 sayfaları. Focusing unit

Significance of Objective Name

(Examples)

Glossary of Terms Used in the Optical Characteristics Table

Working distance (WD)

Number of aperture (NA) : Important figure determining the objective characteristics (resolution, focal depth and bright-

Resolution

Depth of focus

Field number

Field of view

(Plan)

PL : Plan, or correction of image curving on peripheral area.

: Metal observation (no cover)

LM : Long-WD metal observation

SLM : Superlong-WD metal observation

LC : Observation over glass plate

: The distance from the top of specimen and the front lens of objective.

ness).

Resolution ............. Increases in proportion with the NA.

Focal depth ......... Decreases in proportion with the NA.

Brightness ............. Proportional with the square of NA (comparison under the same magnification).

: The limit that an objective can identify the images of two points that are close to each other,

expressed as the distance between the two points on the specimen.

: The maximum depth of the specimen at which the entire specimen can be brought into focus

simultaneously. This value increases when the aperture iris diaphragm is narrowed and de-

creases when the objective NA is increased.

: The diameter of the image area that can be observed through the eyepieces, expressed in mm.

: The diameter of the area observable on the specimen, expressed in mm.

100

None : UIS

: UIS 2

None : Achromat, or aberration correction with 2 wavelengths (red and bleu).

: Semi-Apochromat, or color aberration correction with visual wave-

lengths (bluish purple to red).

APO : Apochromat, or color aberration correction with all visual-domain

wavelength (purple to red).

None : Brightfield

: Darkfield

BDP : Brightfield or polarized

: IR light

Figure : Magnification