Olympus CX33 Talimatlar Kılavuzu - Sayfa 16

Mikroskop Olympus CX33 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus CX33 40 sayfaları. Biological microscope

Moving the specimen

NOTE

TIP

Scale of specimen position

By reading and taking a note of X-axis and Y-axis scales of the observation

position on the specimen, you can return to the original observation position

easily even if the specimen is moved.

< Reading the scale >

TIP

Rotating the upper Y-axis knob a moves the specimen in the Y-axis

direction (front and back).

Rotating the lower X-axis knob b moves the specimen in the X-axis

direction (right and left).

Stage movable range: Depth 52 mm x Width 76 mm

· Do not move the specimen by touching the specimen

holder directly by hand, since it will damage the rotary

mechanism of the knobs.

· The rotation torque of X-axis and Y-axis knobs become

heavier near the end of movable range of X-axis and

Y-axis. In this case, stop rotating the knob.

· If the stage knob rubber c is attached and it is difficult to

operate the stage, remove the stage knob rubber.

If you want to change the height of the stage knob rubber, move

the stage knob rubber up and down to adjust it.

· When attaching the stage knob rubber, insert the larger one to

the Y-axis knob (upper side) and the smaller one to the X-axis

knob (lower side) from below.

Read the "0" position of the outside scale (vernier scale) by the inside

scale (main scale). [ a ]

The scale indicates the unit of 1 mm.

Read the position where the outside scale line coincides with the

inside scale line by the outside scale (vernier scale). [ b ]

The scale indicates the unit of 0.1 mm.

The position shown in the left picture can be read as

137.8 mm.