Olympus FV3000 Kullanım Kılavuzu - Sayfa 9

Mikroskop Olympus FV3000 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Olympus FV3000 38 sayfaları.
Ayrıca Olympus FV3000 için: Güvenlik Kılavuzu (16 sayfalar), Kullanım Kılavuzu (5 sayfalar)

Olympus FV3000 Kullanım Kılavuzu

XYZ Image Acquisition

:Each click shifts the position by the value
u6
entered for Step Size
:Each click shifts the position by ½ the value
entered for Step Size.
6
*Before starting the following procedure, make
adjustments for XY imaging.
(refer to page 4-5.)
Setting Z series
① Select "ON" in [Z] on [Series] Tool Window.
② Select "Start/End" in [Motor] on [Z section].
Pressing the
position is registered as origin.
Register start/end position
③ Change the Z position by rotating the
focusing knob or pressing the
button. Press the
at the Z position to start acquiring the
image.
④ Change the Z position and go on to press
the
button in [End] at the Z position
to end acquiring the image.
⑤ Enter a value in [Slices] or [Step Size].
Setting one will set other automatically.
Pressing the
values "Slices" and "Step Size" is optimized.
Starting Acquisition
⑥ Select [Normal] tab in [Acquire] Tool
Window. Press the
dialog box, and select the folder to save the
images.
Press the
the image.
Finishing Acquisition
⑧ Finishing acquisition,
Press the
image acquisition. If you want to Additional
images under the same condition, enter the
number of additional acquisition and press
the
button. After the image is
acquired, press the
button, current
button in [Start]
button, both numerical
button to display the
button to start acquiring
buttons blink.
button to complete the
button.
u7