Olympus SZX16 Talimatlar Kılavuzu - Sayfa 11

Mikroskop Olympus SZX16 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus SZX16 40 sayfaları. Research high-class stereo microscope
Ayrıca Olympus SZX16 için: Genel Bakış (24 sayfalar), Talimatlar Kılavuzu (36 sayfalar), Talimatlar Kılavuzu (28 sayfalar)

Sayfayı Yazdır

USING THE CONTROLS

4-1 Base

4-2 Microscope Body and Focusing Assembly

Downloaded from

ManualsNet.com

search engine

Using the Stage Plate

In reflected light observation, the stage plate can be placed either the

white or black side facing up.

Win transmitted light observation, use the transparent

NOTE

glass stage plate (SP-C).

Placing the Specimen

Place the specimen on the approximate center of the stage plate. Hold

the specimen with the specimen holder as required.

Illuminate the specimen with an illuminator selected according to the

specimen under observation.

Adjusting the Tension of the Coarse Focus

Adjustment Knob

This operation is intended to facilitate the rotation of the knobs

TIP

while preventing the spontaneous drop of the microscope

body. It is recommended to set the knob tension to a slightly

higher level than the point where spontaneous drop occurs.

If the knobs are hard to move because of the weight of option

modules and/or camera mounted on the microscope body, it

is recommended to use the focusing assembly for heavy load

(SZX2-FOFH).

The tension of the coarse focus adjustment knob can

NOTE

be adjusted with the tension adjustment ring a . Do

not rotate the knobs on the left and right in opposite

directions, for this will damage the internal mechanism.

Rotate the tension adjustment ring a by inserting the Allen

screwdriver c into the hole b on the ring periphery.

Rotating the ring clockwise increases the tension of the coarse

focus adjustment knob, and rotating counterclockwise decreases it.

· If the microscope body falls down by its own weight or

NOTE

the focus obtained by fine focusing is lost immediately, the

tension adjustment may be too light. In this case, rotate the

ring clockwise to increase the tension.

· If the tension adjustment is too tight, delicate focusing will

be impossible and the knob may be damaged. Particularly,

to prevent damage, never rotate the fine focus adjustment

knob quickly while its tension is extremely tight.

SZX16