Olympus U-LH100HGAPO Talimatlar Kılavuzu - Sayfa 32

Mikroskop Olympus U-LH100HGAPO için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus U-LH100HGAPO 36 sayfaları.
Ayrıca Olympus U-LH100HGAPO için: Talimatlar Kılavuzu (42 sayfalar)

Olympus U-LH100HGAPO Talimatlar Kılavuzu

PROPER SELECTION OF THE POWER SUPPLY CORD

n
If no power supply cord is provided, please select the proper power supply cord for the equipment by referring to " Specifications " and
" Certified Cord " below:
CAUTION: In case you use a non-approved power supply cord for Olympus products, Olympus can no longer warrant the
electrical safety of the equipment.
Voltage Rating
Current Rating
Temperature Rating
Length
Fittings Configuration
A power supply cord should be certified by one of the agencies listed in Table 1 , or comprised of cordage marked with an
agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one of agencies listed in
Table 1. In case you are unable to buy locally in your country the power supply cord which is approved by one of the
agencies mentioned in Table 1, please use replacements approved by any other equivalent and authorized agencies in
your country.
Country
Argentina
Australia
Austria
Belgium
Canada
Denmark
Finland
France
Germany
Ireland
29
125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)
6A minimum
60˚C minimum
3.05 m maximum
Grounding type attachment plug cap. Opposite terminates in molded-on IEC
configuration appliance coupling.
Table 1 Certified Cord
Certification
Agency
Mark
IRAM
SAA
ÖVE
CEBEC
CSA
DEMKO
FEI
UTE
VDE
NSAI
Specifications
Country
Italy
Japan
Netherlands
Norway
Spain
Sweden
Switzerland
United
Kingdom
U.S.A.
Certification
Agency
Mark
IMQ
JET, JQA, TÜV,
UL-APEX/MITI
KEMA
NEMKO
AEE
SEMKO
SEV
ASTA
BSI
UL