Olympus PT-E03 Kullanım Kılavuzu - Sayfa 14

Kamera Aksesuarları Olympus PT-E03 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Olympus PT-E03 41 sayfaları. Underwater case for digital camera e-410/e-400

Sayfayı Yazdır

Cleaning the TTL connector

If the threaded sections of the TTL cable and TTL cable connector stick to each other, the cable may

disconnect from the connector. To prevent this, apply O-ring silicone grease, provided with this case to

the threaded sections.

For details, see "Maintenance of the TTL Connector Cap" (P. 34) of this manual.

CAUTION:

If you cannot disconnect the TTL cable, do not use force. Contact Olympus for support.

How to connect the hot shoe cable

To perform TTL flash shooting using the Case, connect the hot shoe cable provided with the Electronic

Flash Case between the connector on the Case and the digital camera's hot shoe.

1 Turn the hot shoe cable connector cap inside the case

counterclockwise to remove it.

2 Insert the connector of the hot shoe cable into the case's

connector and turn the connector screws all the way

clockwise to connect them firmly.

3 Insert the hot shoe on the hot shoe cable into the hot shoe

on the camera.

4 When not using the hot shoe cable, attach the hot shoe

cable cap to the hot shoe cable connector inside the case

and turn the cap all the way clockwise to attach it firmly.

CAUTION:

Be sure to remove the camera from the case when inserting the connector of the hot shoe cable into the

case's connector.

EN 13