Olympus PT-EP06 Kullanım Kılavuzu - Sayfa 15
Kamera Aksesuarları Olympus PT-EP06 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Olympus PT-EP06 24 sayfaları.
Sayfayı YazdırPT-EP06_EN.Book Page 14 Monday, September 26, 2011 5:01 PM
4. Connecting the underwater flash
Connecting the underwater optical fiber cable
To connect the UFL-2 underwater flash (optional) to the Case using an underwater optical fiber cable
(optional: PTCB-E02), follow the procedures below.
Connecting the underwater optical fiber
cable
1 Put the underwater optical fiber cable plug into
the optical fiber cable insertion slot.
Insert firmly until it stops next to the flash window
cover.
2 Put the cap to the optical fiber cable insertion slot
when not in use.
Setting of the digital camera
Set the RC mode of the camera to ON so that the camera's built-in flash is activated.
In case of UFL-2, turn the RC mode to ON.
For details, refer to the instruction manual of UFL-2.
In case of UFL-1, plug the optical fiber cable in the same way.
Turn the RC mode of the camera to OFF.
EN 14