Olympus SZ2-STU3 Talimatlar Kılavuzu - Sayfa 3

Laboratuvar Ekipmanları Olympus SZ2-STU3 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus SZ2-STU3 20 sayfaları. Universal stand, table clamp stand

Sayfayı Yazdır
Olympus SZ2-STU3 Talimatlar Kılavuzu
CONTENTS
The SZ2-STU1, SZ2-STU2 and SZ2-STU3 stands are provided with ESD (Electro-Static Discharge) protection specifica-
tions. Each stand is provided with electroconductive coating in their external finish to reduce the surface resistance.
Connecting a grounding lead wire to the stand (and also the horizontal arm in case of the SZ2-STU2) makes it possible
eliminate static electricity quickly.
CAUTION
To maintain the ESD protection performance, always use the stand in combination with a stereo
microscope, arm used with microscope for equipment mounting and options having the ESD
protection specifications. Otherwise, the grounding will not work properly.
· The clamping knob of the stand is not provided with the ESD protection performance. (The
clamping knob with the ESD protection performance is available on custom order.)
· With the SZ2-STU2, circuit continuity between the horizontal arm and base plate is interrupted by
the friction surface of the column. These parts should be grounded individually.
CAUTION
After the equipment has been used in an observation of a specimen that is accompanied with a
potential of infection, clean the parts coming in contact with the specimen to prevent infection.
This device complies with the requirements of directive 98/79/EC concerning in vitro diagnostic
medical devices. CE marking means the conformity to the directive.
}Intended use
This instrument has been designed to be used to observe magnified images of specimens in routine and research
applications.
Do not use this instrument for any purpose other than its intended use.
1
2
3
1
2
3
SZ2-STU1/SZ2-STU3
SZ2 series
1-2
3
4
5-6
7
8
9-10
11-13