Olympus U-DO3 Talimatlar Kılavuzu - Sayfa 34

Laboratuvar Ekipmanları Olympus U-DO3 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus U-DO3 40 sayfaları. For 2, 5, 9, 10 and 13 persons
Ayrıca Olympus U-DO3 için: Talimatlar Kılavuzu (18 sayfalar)

Sayfayı Yazdır

5-6 Attaching other units

This section describes attaching the common units for all systems and attaching the option unit.

Connecting the AC adapter

· Always use the AC adapter and power cord provided by

CAUTION

Olympus. If the proper AC adapter and the power cord

are not used, the electric safety and the EMC (Electro-

Magnetic Compatibility) performance of the product

cannot be assured. If no power cord is provided, please

select the proper power cord by referring to the section

"Proper selection of the power cord" at the end of this

instruction manual.

· The power cord should be connected to a grounded,

3-conductor power outlet. If the power outlet is not

grounded properly, Olympus can no longer warrant the

electrical safety performance of the equipment.

· Before connecting the AC adapter, rotate the pointer

NOTE

brightness control knob in counterclockwise direction to

set to the OFF position.

· The power cord is vulnerable when bent or twisted. Never

subject it to excessive force.

Connect the AC adapter's output plug a completely to the AC

adapter input connector b on the left side panel of the observation

attachment body.

Insert the power cord connector c to the AC adapter's input connector

d .