Axminster 100090 Kullanıcı Kılavuzu - Sayfa 9

Testere Axminster 100090 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Axminster 100090 12 sayfaları. Metal cutting bandsaw

Parts Identification and Description (Continued)

Height preset

A large bolt threaded into the front part of the quadrant. It strikes against a

(See fig 5)

lower protrusion on the main frame casting. Adjusting the height of the bolt

will govern the depth of cut of the saw blade. The Off switch striker can then

be adjusted to switch the saw off at this position if so required. As with the

switch striker, the preset height bolt is held in position by a lock nut.

Anchor/transport A short length of chain fixed to the base, that can be anchored to the saw

chain

frame, using a small 'star handled' bolt through one of the links. This will keep

(See fig 9d)

the saw anchored 'down' during transit.

Extended table

A small pressed steel table that is bolted on to the side of the base alongside

(See fig8)

the vice. It can act as a 'catcher' for the smaller lengths that can be cut off by

the saw.

Machine Illustration of the Metal Cutting Bandsaw

Handle

Fig 5

Typ. 5No. M4 clamphead bolts

Blade and

wheel cover

Pulley and drive belt cover

Mounting

pivot yoke

Mounting Quadrant

Blade tensioner

Blade

Clamping

lever handle

Lower limit stop

Rear jaw rod

Vice

Main frame