Axminster TS-200 Kullanım Kılavuzu ve Parça Listesi - Sayfa 4

Testere Axminster TS-200 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Parça Listesi indirin. Axminster TS-200 17 sayfaları. 200mm table saw

Use proper extension cord: Make sure your extension cord is in good condition. When using an extension

cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will

cause a drop in line voltage resulting in loss of power and overheating. The table below shows the correct

size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge

The smaller the gauge number, the heavier the cord.

Familiarize yourself with the following safety notices used in this manual:

Familiarize yourself with the location of these decals on your table saw.

CAUTION: (This means that if precautions are not heeded, it may result in minor or moderate injury

and/or possible machine damage)

WARNING: (This means that if precautions are not heeded, it could result in serious injury or

possibly even death).

Safety Decals

This machine has been built exclusively for woodworking. Do not alter the design of the machine or use it for

purposes not intended by the manufacturer. The manufacturer is not liable for damage or injury which results

from incorrect assembly, operation or electrical connections. This machine must be operated under strict

safety regulations. This is the only way to reduce the risk of accidents.

Minimum gauge for cord