Alphacom NR200HP Kullanıcı Kılavuzu - Sayfa 11

Telefon Alphacom NR200HP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alphacom NR200HP 14 sayfaları. Executive range headsetphone

11.4

MIXED MODE OPERATION

If you are connected to an exchange requiring puLSE dialling and you wish

to route your calls via an alternative carrier (if available), it is necessary to

dial an ACCESS code in puLSE mode followed by a pause and then an

AuTHORISATION code in TONE mode. Since the telephone numbers of all

calls to be re-routed via the alternative carrier will have to be preceded by

the same access and authorisation codes, it is convenient to store them in a

memory location.

11.5

This is generally only used when the telephone is connected to a pAbx

(private Automatic branch Exchange) and gives access to features provided

by that exchange. However, RECALL is becoming a feature on the new

digital exchanges to give access to new services such as some of bT's

Network Services.

for full information on the use of the RECALL button, please consult your

pAbx instructions or your Network Operator providing the services.

for setting the correct RECALL mode, please refer to section under

'INSTALLATION'.

11.6

These are used with the new services provided by digital exchanges as well

as accessing features on some pAbx's. They have no dialling function in

pulse dialling mode.

11.7

When using the NR200Hp Headsetphone in handset mode (not headset),

whilst the handset mute button is depressed the other party will not hear the

conversation. If specified the NR200HP Headsetphone can be supplied with

this button as 'push to talk', and in this instance the telephone will be clearly

marked as such.

Nb. The handset mute button is inoperable when the NR200Hp

Headsetphone is in headset mode, and therefore all speech when in this

mode will be transmitted normally.

11.8

pressing the MuTE button during a call will deactivate speech transmission.

When mute is activated, its LED indicator will light up. press the mute button

again to deactivate the mute function.

11.9

The SAVE button is used to store a dialled number, it may store up to 32

digits. To store a number press SAVE after the number has been dialled.