AccuMed CMS-50D Manuel - Sayfa 12

Tıbbi Ekipman AccuMed CMS-50D için çevrimiçi göz atın veya pdf Manuel indirin. AccuMed CMS-50D 14 sayfaları. Fingertip pulse oximeter
Ayrıca AccuMed CMS-50D için: Kullanıcı Kılavuzu (2 sayfalar)

Sayfayı Yazdır
The SpO
and Pulse Rate
2
display instable
The device can not turn
on
The display is off
suddenly

11. Function Specification

Display Information
The Pulse Oxygen Saturation（SpO
Pulse Rate（bpm）
Pulse Intensity (bar-graph)
SpO
Parameter Specification
2
Measuring range
Accuracy
Optical Sensor
1. The finger is not placed inside deep
enough.
2. The finger is shaking or the patient
is moving.
1. The batteries are drained or almost
drained.
2. The batteries are not inserted
properly.
3. The device's malfunction
1. The device will power off
automatically if no signal is detected
within 5 seconds.
2. The batteries are almost drained.
Display Mode
2-digit digital OLED display
）
2
3-digit digital OLED display
bar-graph
35%～100%, (the resolution is 1%).
±2% during 70%～100%.Below 70% unspecified.
Red light (wavelength is 660nm)
Infrared (wavelength is 940nm)
photosensor
9
1. Place the finger properly
and try again.
2. Let the patient keep calm
1. Reinstall batteries.
2. Please contact the local
service center.
1. Normal.
2. Change batteries.
OLED display