Axon Body 2 Hızlı İpuçları Kılavuzu - Sayfa 5
Güvenlik Kamerası Axon Body 2 için çevrimiçi göz atın veya pdf Hızlı İpuçları Kılavuzu indirin. Axon Body 2 6 sayfaları.
Ayrıca Axon Body 2 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
2. Open the Axon View.
3. Tap (Settings icon) in the upper-left side of the screen to go to the Settings.
4. Under the Camera section, tap the switch to the right of the Stealth Mode to change the setting.
If the switch is toggled to the right, stealth mode on the camera is enabled: the camera will not
beep or vibrate, regardless of other settings, and all camera lights are off. If the switch is toggled
to the left, stealth mode on the camera is disabled: the camera beeps and vibrates. Camera lights
operate normally.
Audio prompt and vibration guide
The Axon Body 2 camera emits beeping sounds called "audio prompts" to notify you of the system status.
These audio prompts usually occur after you perform an action with the body camera. For some actions, the
camera also vibrates while making an audio prompt.
OPERATING MODE
Powering on or off
Recording an event
Press the battery button while the camera is recording
The device is ending an event and returning to
BUFFERING mode
Low battery notifications:
Camera in BUFFERING mode and battery has power for
20 minutes or less (the camera will not record)
Camera in EVENT (recording) mode and battery nearly
discharged (the camera will shut down within a few
minutes)
The camera memory is full. The camera will not start
recording.
The camera internal clock is not set. Place in an Axon
Dock or connect to Evidence Sync to correct this issue.
AUDIO
NOTIFICATION
One beep
Two beeps (every two
minutes)
Two beeps
One long beep
Four quick beeps (every
20 seconds)
Three beeps
Five beeps (every 20
seconds)
VIBRATION
Once
Twice (every two
minutes)
None
Once, long-duration
Four times, quickly
(every 20 seconds)
Three times
Five times (every 20
seconds