Alphatron JIB EPT Kullanıcı Kılavuzu - Sayfa 8
Kamera Aksesuarları Alphatron JIB EPT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alphatron JIB EPT 17 sayfaları. Jib & motorised pan and tilt unit
JIB EPT USER MANUAL
EPT signal and power cable
The remote control unit (24) is
connected to the EPT head using a
standard UPT cable (up to 10m). The
cable is attached to the remote unit
at connector (30 - fig2.) and at the
motor control box at connector (18 -
fig1.).
The EPT can be power by an 12V
adapter or a 12-14.7V battery'
Note: correct operation of the EPT is
only guaranteed when using the
supplied power adapter.
Remote control unit
To turn on or off the EPT head
please use switch (25).
To switch between the two speed
figure 8: EPT remote control unit
setting please press the joystick
(thumb-stick).
8
©
| MADE IN THE NETHERLAND