Axor Starck 10100800 Montaj - Sayfa 6

Sıhhi Tesisat Ürünleri Axor Starck 10100800 için çevrimiçi göz atın veya pdf Montaj indirin. Axor Starck 10100800 17 sayfaları.

Sayfayı Yazdır

Assembly (1)

Attention! The fitting must be installed, flushed

and tested after the valid norms!

Attention! The mixer must be connected to angled

or straight isolation valves with integrated filter. The

mixer can not used together with a continuous flow

water heater.

1. Flush through the supply pipes.

2. Place the mixer including the sealing washer in

position on the basin.

3. Slip the slide washer, washer and collar nut

over the threaded base and tighten the collar

nut by hand.

4. Tighten screws.

5. Connect the supply pipes to the isolation

valves;

cold right - hot left.

6. Install the battery (please see Exchange bat-

tery).

The hot and cold water supplys should be of equal

pressures.

Operation (10100800)

The water temperature is adjusted by the adjusting

lever.

move forward = cold water,

move backward = hot water.

English

cover

infrared sensor with

light emitting diode

(LED)

adjusting lever

(10100800)

Adjustment (2)

This mixer has the following feature:

background fade-out with integrated range

adjustment, that means the mixer is automatically

adjusted on to the local conditions (washbasin,

brightness, reflection) by the sensory mechanism.

Exchange battery (3)

The mixer operates with a 6 V Lithium-Battery (DL

223A). The working life of the battery is 2 years

by extremely operation. Over night the current

consumption is reduced by a economy mode.

Push a small allen key into the hole at the

backside of the mixer and pull the cover upwards.

Take care of the O-ring.

Attention: After installing the battery, the

mixer may not be activated for 1 min because of

adjusting itself.

LED-Display

LED off:

LED light:

Technical Data

Operating pressure:

Recommended operating pressure: 1 - 5 bar

Test pressure:

Hot water temperature:

Recommended hot water temp.:

Rate of flow:

Maximum flowing-out temperature

at 50 K temperature difference

and 3 bar flow pressure:

Follow-on time:

Rise-delay time:

Automatic switching-off:

Battery:

Spare parts (see page 3)

battery

connection hose

battery box with cover

aerator cpl.

fixing set

normal operation

replacing battery

max. 8 bar

16 bar

max. 80 °C

65 °C

6,5 l/min 3 bar

42 °C

1,5 s

300 ms

after 1 min

6V / 1300 mAh

Lithium

97399000

97456000

96317800

94005800

13961000