ARC Appliances ADF6SEI Kurulum ve Kullanım Kılavuzu - Sayfa 8

Bulaşık Makinesi ARC Appliances ADF6SEI için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. ARC Appliances ADF6SEI 18 sayfaları.

If there is no rinse aid warning light in the control panel, you can judge the amount of rinse aid by the following means. The

black dot on the rinse aid dispenser indicates the amount of rinse aid in the dispenser. As the rinse aid diminishes, the size of

the black dot decreases. You should never let the rinse aid get below 1 / 4 full.

The upper rack is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cup and saucers, as well

as plates, small bowls and shallow pans(as long as they are not too dirty).

Position the dishes and cookware so that they do not get moved

by the spray of water.

The upper rack can be adjusted for height by putting wheels of

different height into the rails.

For the below placement method of Rack, the adjustment position

of Upper Rack must be as below shown on the illustration.

If required,the height of the upper rack can be adjuested in order to creat more space for large utensils either in the upper rack

or lower rack.

The upper rack can be adjusted for height by putting wheels of different height into the rails.

Long items,serving cutlery,salad servers or knives should be placed on the shelf so that they do not obstruct the rotation of the

spray arms. The shelf can be folded back or removed when not required for use.

A measured amount of rinse-aid is released during the final rinse. As with detergent, the amount

of rinse-aid needed for your dishes depends on the hardness of the water in your area. Too much

rinse-aid can result in lather of foaming and cause cloudiness or steaks on your dishes. If the

water in your area is very soft, you may not need rinse-aid. If you do,you can dilute the rinse-aid

with an equal amount of water.

The rinse-aid dispenser has six or four settings. Always start with the dispenser set on " 2 ". If

spots and poor drying are problems, increase the amount of rinse aid dispensed by removing the

dispenserlid and rotating the dial to "3". If the dishes still are not drying properly or are spotted,

adjust the dial to the next higher number until your dishes are spot-free. We suggest you

to set on "4" .(Factory value is "4".)

As the rinse aid diminishes, the size of the black dot on the rinse

aid level indi cator changes, as illustrated below.

Full

3 / 4 full

1 / 2 full

1 / 4 full - Should refill to el iminate spotting

Empty