Cino Fuzzyscan Hızlı Başlangıç Kılavuzu - Sayfa 6

Barkod okuyucu Cino Fuzzyscan için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cino Fuzzyscan 17 sayfaları. Bluetooth cordless scanner
Ayrıca Cino Fuzzyscan için: Hızlı Başlangıç Kılavuzu (17 sayfalar), Hızlı Başlangıç Kılavuzu (15 sayfalar), Hızlı Başlangıç Kılavuzu (17 sayfalar), Hızlı Başlangıç Kılavuzu (17 sayfalar), Hızlı Referans Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (17 sayfalar)

Flash Mode

When flash mode is selected, the scanner flashes the light source without

having to press the trigger switch. If the scanner detects an image which is

similar to a bar code, it forces on the light source automatically and scans the

bar code.

Force Mode

When force mode is selected, the light source of the scanner is forced on for

continued operation without having to press the trigger switch. This mode is

convenient for high speed bar code reading.

Toggle Mode

When toggle mode is selected, you must press the trigger switch to turn on

the light source of the scanner to start scanning operation. The scanner

keeps the light source on until you press the trigger switch again. This mode

is very similar to alternative mode but without the preset light source on time

concern.

Diagnostic Mode

When diagnostic mode is selected, the light source of the scanner is forced

on without regard for other programmable parameters, such as reread delay,

redundancy, and so on.

Low Power Mode

When low power mode is selected, the scanner goes into idle state after

scanning the bar code. You must press the trigger switch to wake up the

scanner for operation.